Selection Oak

The soul of oak for informal luxury.

Selection Oak - Oak Look Tiles | Rex | Florim Ceramiche S.p.A.
Multiple suggestions capable of dialoging with the charm of nature.

Multiple suggestions capable of dialoging with the charm of nature.

A fine and authentic line takes you back, as in an incantation, to a faraway past, bringing to mind memories of marine settings and uncontaminated forests. The imperfection of nature becomes the perfect harmony of different nuances and shades that interpret the space in a modern key.

Selection Oak - Oak Look Tiles | Rex | Florim Ceramiche S.p.A.
Selection Oak - Oak Look Tiles | Rex | Florim Ceramiche S.p.A.
Selection Oak - Oak Look Tiles | Rex | Florim Ceramiche S.p.A.

Four nuances are also available in the Magnum Oversize project large sizes, giving life to an architectural language where the ceramic slabs, with their vast surfaces, become the true protagonists of the space.

Selection Oak - Oak Look Tiles | Rex | Florim Ceramiche S.p.A.
Selection Oak - Oak Look Tiles | Rex | Florim Ceramiche S.p.A.
Selection Oak - Oak Look Tiles | Rex | Florim Ceramiche S.p.A.

TECHNICAL NOTES

Selection Oak is a collection in fine porcelain stoneware available in a soft and smooth texture and six shades, chosen with refined precision, from bleached oak, to lighter oak, all the way to dark oak.

Colors

White Oak

Cream Oak

Gray Oak

Amber Oak

Brown Oak

Black Oak

Sizes

15x120 cm 6"x48"

15x90 cm 6"x36"

20x120 cm 8"x48"

20x180 cm 8"x71"

22,5x90 cm 9"x36"

26,5x180 cm 101/2"x71"

26,5x240 cm 101/2"x95"

40x120 cm 16"x48"

Modulo Listello

modulo listello 7,5x30 30x30 cm Modulo Listello 3"x12" 12"x12"

Modulo Listello Sfalsato

modulo listello sfalsato 15x45 cm Modulo Listello Sfalsato 6"x18"

Thickness

10,00 mm

6,00 mm

20,00 mm

Surfaces

MATTE

SLATE-HAMMERED

Colors:

Size:

Thickness:

Surface:

Decoro Magnum

MAGNUM DECORO REXA

DECORO REXA

120x240 cm

MAGNUM DECORO REXB

DECORO REXB

240x240 cm

MAGNUM DECORO REXC

DECORO REXC

240x240 cm

MAGNUM DECORO REXF

DECORO REXF

120x240 cm

MAGNUM DECORO REXD/A

DECORO REXD/A

80x80 cm

MAGNUM DECORO REXD/B

DECORO REXD/B

80x80 cm

MAGNUM DECORO REXD/C

DECORO REXD/C

80x80 cm

MAGNUM DECORO REXD/D

DECORO REXD/D

80x80 cm

MAGNUM DECORO REXD/E

DECORO REXD/E

80x80 cm

MAGNUM DECORO REXD/F

DECORO REXD/F

80x80 cm

MAGNUM DECORO REXO

DECORO REXO

120x240 cm

MAGNUM DECORO REXQ

DECORO REXQ

240x265 cm

Modulo Listello

SELECTION WHITE OAK MOD.LISTELLO 30X30

White Oak matte

modulo listello 7,5x30 30x30 cm

SELECTION CREAM OAK MOD.LISTELLO 30X30

Cream Oak matte

modulo listello 7,5x30 30x30 cm

SELECTION GRAY OAK MOD.LISTELLO 30X30

Gray Oak matte

modulo listello 7,5x30 30x30 cm

SELECTION AMBER OAK MOD.LISTELLO 30X30

Amber Oak matte

modulo listello 7,5x30 30x30 cm

SELECTION BROWN OAK MOD.LISTELLO 30X30

Brown Oak matte

modulo listello 7,5x30 30x30 cm

SELECTION BLACK OAK MOD.LISTELLO 30X30

Black Oak matte

modulo listello 7,5x30 30x30 cm

Modulo Listello Sfalsato

SELECTION WHITE OAK MOD.LIST.SFAL.15X45

White Oak matte

modulo listello sfalsato 15x45 cm

SELECTION CREAM OAK MOD.LIST.SFAL.15X45

Cream Oak matte

modulo listello sfalsato 15x45 cm

SELECTION GRAY OAK MOD.LIST.SFAL.15X45

Gray Oak matte

modulo listello sfalsato 15x45 cm

SELECTION AMBER OAK MOD.LIST.SFAL.15X45

Amber Oak matte

modulo listello sfalsato 15x45 cm

SELECTION BROWN OAK MOD.LIST.SFAL.15X45

Brown Oak matte

modulo listello sfalsato 15x45 cm

SELECTION BLACK OAK MOD.LIST.SFAL.15X45

Black Oak matte

modulo listello sfalsato 15x45 cm

Reference standard E.N. 14411 . Appendix G. Group BⅠa. UGL
Test method
Reference value
Declared value
Download
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to staining
ISO-10545-14
-
Cl. 4
Slip resistance with shoes
DIN-51130:2010
-
R9
matte
Slip resistance with shoes
DIN-51130:2010
-
R11
strutturata
Slip resistance with shoes
DIN-51130:2010
-
R10
Barefoot slip resistance
DIN-51097
-
Cl. C
strutturata
Static coefficient of friction
ASTM-C1028
>0,60 dry and wet
> 0,6 dry and wet
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

* Test performed on 80x80cm size (6mm)

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,2%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness < 7,5 mm)
ISO-10545-4
≥700 Newton
average value 1350 N *
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
Resistance to staining
ISO-10545-14
-
Cl. 4
Slip resistance with shoes
DIN-51130:2010
-
R10
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

* Test performed on 80x80cm size (6mm)

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 14000 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to staining
ISO-10545-14
-
Cl. 4
Slip resistance with shoes
DIN-51130:2010
-
R11
Barefoot slip resistance
DIN-51097
-
Cl. A+B
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

* Test performed on 80x80cm size (6mm)

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

Subscribe to the Florim newsletter

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

Italiano Chiudi / Close