Walks/1.0

The natural appearance of quartzite at the service of design

Ceramic indoor and outdoor flooring: Walks/1.0 by Floor Gres
Walks/1.0 represents a non-conventional simplicity

Walks/1.0 represents a non-conventional simplicity

Walks/1.0 reinterprets the appearance of quartzite, a type of extremely resistant metamorphic rock, often hewn, very widespread in various areas of the building and refractory industries. Made in fine porcelain stoneware with high slip resistance, Walks/1.0 is available in a variety of colors, multiple sizes and thickness options perfect for use even in the most complex designs such as pools and wellness environments.

Ceramic indoor and outdoor flooring: Walks/1.0 by Floor Gres
Ceramic indoor and outdoor flooring: Walks/1.0 by Floor Gres
Ceramic indoor and outdoor flooring: Walks/1.0 by Floor Gres

The natural aspect of the surface and the texture of the hewn effect combine perfectly with the enhancement of graphics, colors and structures to interpret interior architectures and exterior spaces in harmony with one another and with the surrounding landscape. Also available in the Magnum Oversize formats that reach up to 160x320 cm, Walks/1.0 creates the perfect synthesis between nature and technology, joining the values of research with the quality of the raw materials.

Ceramic indoor and outdoor flooring: Walks/1.0 by Floor Gres
Ceramic indoor and outdoor flooring: Walks/1.0 by Floor Gres
Ceramic indoor and outdoor flooring: Walks/1.0 by Floor Gres

Colors

White

Gray

Beige

Black

Sizes

160x320 cm 64"x126"

30x60 cm 12"x24"

40x120 cm 16"x48"

40x80 cm 16"x32"

60x120 cm 24"x48"

60x60 cm 24"x24"

80x240 cm 32"x95"

80x80 cm 32"x32"

Modulo Listello Sfalsato

modulo listello sfalsato 21x40 cm Modulo Listello Sfalsato 81/4"x16"

Mosaico

mosaico 3x3 30x30 cm Mosaico 11/8"x11/8" 12"x12"

Thickness

10,00 mm

20,00 mm

6,00 mm

Surfaces

MATTE

SOFT

Colors:

Size:

Thickness:

Surface:

Decoro Magnum

MAGNUM DECORO FLC

DECORO FLC

320x320 cm

MAGNUM DECORO FLE/A

DECORO FLE A

120x60 cm

MAGNUM DECORO FLE/B

DECORO FLE B

120x60 cm

MAGNUM DECORO FLE/C

DECORO FLE C

120x60 cm

MAGNUM DECORO FLF

DECORO FLF

120x240 cm

MAGNUM DECORO FLN

DECORO FLN

120x240 cm

MAGNUM DECORO FLE/A/B/C

DECORO FLE A/B/C

240x240 cm

Modulo Listello Sfalsato

WALKS 1.0 WHITE MODULO LIST.SFALS 21X40

White naturale

modulo listello sfalsato 21x40 cm

WALKS 1.0 BEIGE MODULO LIST.SFALS 21X40

Beige naturale

modulo listello sfalsato 21x40 cm

WALKS 1.0 GRAY MODULO LIST.SFALS. 21X40

Gray naturale

modulo listello sfalsato 21x40 cm

WALKS 1.0 BLACK MODULO LIST.SFALS 21X40

Black naturale

modulo listello sfalsato 21x40 cm

WALKS 1.0 WHITE MOD.LIST.SFAL 21X40 SOFT

White soft

modulo listello sfalsato 21x40 cm

WALKS 1.0 BEIGE MOD.LIST.SFAL 21X40 SOFT

Beige soft

modulo listello sfalsato 21x40 cm

WALKS 1.0 GRAY MOD.LIST.SFAL 21X40 SOFT

Gray soft

modulo listello sfalsato 21x40 cm

WALKS 1.0 BLACK MOD.LIST.SFAL 21X40 SOFT

Black soft

modulo listello sfalsato 21x40 cm

Mosaico

WALKS 1.0 WHITE MOSAICO 3X3

White naturale

mosaico 3x3 30x30 cm

WALKS 1.0 BEIGE MOSAICO 3X3

Beige naturale

mosaico 3x3 30x30 cm

WALKS 1.0 GRAY MOSAICO 3X3

Gray naturale

mosaico 3x3 30x30 cm

WALKS 1.0 BLACK MOSAICO 3X3

Black naturale

mosaico 3x3 30x30 cm

Featured Projects

Projects with the collection

Reference standard E.N. 14411 . Appendix G. Group BⅠa. UGL
Test method
Reference value
Declared value
Download
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to staining
ISO-10545-14
-
4
Slip resistance with shoes
DIN-51130:2010
-
R9
soft
Slip resistance with shoes
DIN-51130:2010
-
R11
naturale
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to staining
ISO-10545-14
-
4
Slip resistance with shoes
DIN-51130:2010
-
R11
naturale
Barefoot slip resistance
DIN-51097
-
Cl. A+B+C
naturale
Static coefficient of friction
ASTM-C1028
>0,60 dry and wet
> 0,6 dry and wet
naturale
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 14000 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
>0,42 wet

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,2%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to staining
ISO-10545-14
-
4
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2
Breaking strength in N (thickness < 7,5 mm)
ISO-10545-4
≥700 Newton
average value 1350 N

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

Subscribe to the Florim newsletter

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

Italiano Chiudi / Close