The new loose-lay solution for exteriors

Tech#2 represents a new way to tile terraces, gazebos, gardens, roofs, pools and relaxation areas combining design, performance, easy laying and environmental friendliness. Tech#2 is the new loose-lay solution that can be applied without joints on grass, gravel, concrete floor slabs or on fixed or adjustable feet.

Loose Lay Flooring - Tech#2 | Floor Gres | Florim S.p.A. SB

Colors

Light Gray

Grey

Sizes

60x60 cm 24"x24"

40x120 cm 16"x48"

Thickness

20,00 mm

Surfaces*

SLATE-HAMMERED

* To find out more about the meaning of each surface, read the glossary at the following link www.florim.com/en/surfaces/

Colors:

Size:

Thickness:

Surface:

Reset filters Go to the product

Reference standard E.N. 14411-ISO 13006 . Appendix G. Group BⅠa. UGL

Test method

Reference value

Declared value

Download

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±1 mm)
± 0,15%

Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%

Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±0,8 mm)
± 0,1%

Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±1,5 mm)
± 0,2%

Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ

Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
Squadrato ISO 13006 - ±0,4% (±1,8 mm)
± 0,35%

Amount of water absorbed, in percentage

ISO-10545-3

E≤0,5%

average value 0,08%

Bending strength in N/mm2

ISO-10545-4

>35 N/mm2

average value 52 N/mm2

Breaking strength in N (thickness >= 7,5 mm)

ISO-10545-4

≥1300 Newton

average value 14000 N

Thermal shock resistance

ISO-10545-9

-

RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ

Frost resistance

ISO-10545-12

Richiesta / Required / Requise / Gefordert / Requerida

RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ

Resistance to staining

ISO-10545-14

-

3-4

Resistance to high concentrations of acids and alkali

ISO-10545-13

Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante

UHA

Resistance to low concentrations of acids and alkali

ISO-10545-13

Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante

ULA

Resistance to domestic chemicals and additives for swimming pools

ISO-10545-13

UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo

UA

Slip resistance with shoes

DIN-51130

-

R12

Barefoot slip resistance

DIN-51097

-

Cl. C

Static coefficient of friction

ASTM-C1028

>0,60 dry and wet

> 0,6 dry and wet

Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)

DCOF

>0,42 wet

Resistance to deep abrasion of unglazed tiles

ISO-10545-6

<175 mm3

average value 140

Notes

Ceramic tiles undergo a compacting thermal treatment that ensures resistance and durability. The low level of water absorption makes the slabs frost resistant. This could result in superficial water stagnations even if materials are installed in a workmanlike manner.