Rawtech/

The worn look is the new distinctive character of cement

Rawtech - Raw Concrete Look Tiles | Floor Gres | Florim Ceramiche
Where imperfection becomes a distinguishing sign and an essential prerequisite

Where imperfection becomes a distinguishing sign and an essential prerequisite

Rawtech is the new Floor Gres collection that includes the range of products inspired by cement to best express an unmistakable style, mixing attractive graphics with high performance from a technical point of view.

Rawtech - Raw Concrete Look Tiles | Floor Gres | Florim Ceramiche
Rawtech - Raw Concrete Look Tiles | Floor Gres | Florim Ceramiche
Rawtech - Raw Concrete Look Tiles | Floor Gres | Florim Ceramiche

Rawtech is the worn cement effect fine porcelain stoneware where imperfection becomes the distinguishing character of a product with markedly industrial traits. The range of modern colors develops over modular sizes and surfaces that are resistant to the stress of the most complex building applications, meeting the needs of the most sophisticated dwellings with modern style and taste. 

Rawtech - Raw Concrete Look Tiles | Floor Gres | Florim Ceramiche
Rawtech - Raw Concrete Look Tiles | Floor Gres | Florim Ceramiche
Rawtech - Raw Concrete Look Tiles | Floor Gres | Florim Ceramiche

Colors

Raw-White

Raw-Dust

Raw-Mud

Raw-Coal

Sizes

120x240 cm 48"x95"

120x120 cm 48"x48"

80x180 cm 32"x71"

80x80 cm 32"x32"

60x120 cm 24"x48"

60x60 cm 24"x24"

60x240 cm 24"x95"

40x80 cm 16"x32"

30x60 cm 12"x24"

modulo listello sfalsato 21x40 cm Modulo Listello Sfalasato 81/4"x16"

mosaico 3x3 30x30 cm Mosaico 11/8"x11/8" 12"x12"

Thickness

10,00 mm

6,00 mm

Surfaces

MATTE

SLATE-HAMMERED

MATTE - R+PTV

Colors:

Size:

Thickness:

Surface:

Modulo Listello Sfalsato

RAWTECH RAW-WHITE NAT.LIST.SFALS 21x40

Raw-White naturale

modulo listello sfalsato 21x40 cm

RAWTECH RAW-COAL NAT.LIST.SFALS 21x40

Raw-Coal naturale

modulo listello sfalsato 21x40 cm

RAWTECH RAW-MUD NAT.LIST.SFALS 21x40

Raw-Mud naturale

modulo listello sfalsato 21x40 cm

RAWTECH RAW-DUST NAT.LIST.SFALS 21x40

Raw-Dust naturale

modulo listello sfalsato 21x40 cm

Mosaico

RAWTECH RAW-WHITE NAT 3x3 MOSAICO 30X30

Raw-White naturale

mosaico 3x3 30x30 cm

RAWTECH RAW-MUD NAT 3x3 MOSAICO 30X30

Raw-Mud naturale

mosaico 3x3 30x30 cm

RAWTECH RAW-DUST NAT 3x3 MOSAICO 30X30

Raw-Dust naturale

mosaico 3x3 30x30 cm

RAWTECH RAW-COAL NAT 3x3 MOSAICO 30X30

Raw-Coal naturale

mosaico 3x3 30x30 cm

Reference standard E.N. 14411 . Appendix G. Group BⅠa. UGL
Test method
Reference value
Declared value
Download
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average vale 3200N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to staining
ISO-10545-14
-
Cl. 4
Pendulum friction test
BS-7976
-
> 36 wet
Slip resistance with shoes
DIN-51130:2010
-
R10
naturale
Slip resistance with shoes
DIN-51130:2010
-
R11
strutturato
Barefoot slip resistance
DIN-51097
-
Cl. A+B
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,2%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness < 7,5 mm)
ISO-10545-4
≥700 Newton
average value 1350N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to staining
ISO-10545-14
-
Cl. 4
Pendulum friction test
BS-7976
-
> 36 wet
naturale---rptv
Slip resistance with shoes
DIN-51130:2010
-
R10
naturale---rptv
Slip resistance with shoes
DIN-51130:2010
-
R9
Barefoot slip resistance
DIN-51097
-
Cl. A+B
naturale---rptv
Barefoot slip resistance
DIN-51097
-
Cl. A
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
naturale---rptv
Release of hazardous substances
DM-1-2-2007-Reg-CE-1935-2004
Valore dichiarato per superfici gl con impieghi su piani di lavoro / Declared value for gl surfaces used on worktops / valeur déclarée Pour surfaces gl utilisées sur plans de travail /angegebener wert für Gl oberflächen zum gebrauch als arbeitsplatten / valor declarado Para acabados gl utilizados para superficies de trabajo / заявленное Значение для глазурованных поверхностей, с использованием на рабочих столах
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

If you want, we'll keep you updated on the latest news about products and events

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

Italiano Chiudi / Close