Flowtech/

Strength and innovation blend in the icon of industrial style

Go Industrial with Metal Look Tile: Flowtech | Florim Ceramiche S.p.A.
Out of the study of metal and its evolutionary transformation, FLOWTECH is born

Out of the study of metal and its evolutionary transformation, FLOWTECH is born

The Flowtech porcelain stoneware sheets define the style of a public and private environment through a bold industrial appearance. The iconic aesthetics of a specific selection of metals combines with the benefits of impervious properties over time and resistance to weather conditions that are so typical of "Made in Florim" porcelain stoneware.

Go Industrial with Metal Look Tile: Flowtech | Florim Ceramiche S.p.A.
Go Industrial with Metal Look Tile: Flowtech | Florim Ceramiche S.p.A.
Go Industrial with Metal Look Tile: Flowtech | Florim Ceramiche S.p.A.

The attention to detail and the perfect colour balance of the three available versions, combined with the vast selection of sizes in 10 mm and 6 mm thickness options (large Magnum Oversize sheets) boldly express the architectural versatility of Floor Gres, the Florim brand that meets the needs of professionals with design solutions suitable for any application.  

Go Industrial with Metal Look Tile: Flowtech | Florim Ceramiche S.p.A.
Go Industrial with Metal Look Tile: Flowtech | Florim Ceramiche S.p.A.
Go Industrial with Metal Look Tile: Flowtech | Florim Ceramiche S.p.A.

Colors

Russet

Aged Bronze

Burnished

Sizes

160x320 cm 63"x126"

160x160 cm 63"x63"

120x240 cm 48"x95"

120x120 cm 48"x48"

80x80 cm 32"x32"

60x240 cm 24"x95"

60x120 cm 24"x48"

60x60 cm 24"x24"

40x80 cm 16"x32"

30x60 cm 12"x24"

modulo listello sfalsato 21x40 cm Modulo Listello Sfalsato 81/4"x16"

modulo muretto sfalsato 7,5x15 30x30 cm Modulo Muretto 3"x6" 12"x12"

mosaico 1,5x3 30x30 cm Mosaico 1/2x11/8" 12"x12"

mosaico 7,5x7,5 30x30 cm Mosaico 3"x3" 12"x12"

Thickness

10,00 mm

6,00 mm

Surfaces

MATTE

MATTE - R+PTV

Colors:

Size:

Thickness:

Surface:

Modulo Listello Sfalsato

FLOWTECH RUSSET NAT.LIST.SFALS 21x40

Russet naturale

modulo listello sfalsato 21x40 cm

FLOWTECH AGED BRONZ NAT.LIST.SFALS 21x40

Aged Bronze naturale

modulo listello sfalsato 21x40 cm

FLOWTECH BURNISHED NAT.LIST.SFALS 21x40

Burnished naturale

modulo listello sfalsato 21x40 cm

Modulo Muretto Sfalsato Magnum

FLOWTECH RUSSET NAT.6MM 7,5x15 MUR.

Russet naturale

modulo muretto sfalsato 7,5x15 30x30 cm

FLOWTECH AGED BRONZE NAT.6MM 7,5x15 MUR.

Aged Bronze naturale

modulo muretto sfalsato 7,5x15 30x30 cm

FLOWTECH BURNISHED NAT.6MM 7,5x15 MUR.

Burnished naturale

modulo muretto sfalsato 7,5x15 30x30 cm

Mosaico Magnum

FLOWTECH RUSSET NAT.6MM 7,5x7,5 MOS.

Russet naturale

mosaico 7,5x7,5 30x30 cm

FLOWTECH AGED BRONZE NAT.6MM 7,5X7,5 MOS

Aged Bronze naturale

mosaico 7,5x7,5 30x30 cm

FLOWTECH BURNISHED NAT.6MM 7,5x7,5 MOS.

Burnished naturale

mosaico 7,5x7,5 30x30 cm

FLOWTECH RUSSET NAT.6MM 1,5x3 MOS.

Russet naturale

mosaico 1,5x3 30x30 cm

FLOWTECH AGED BRONZE NAT.6MM 1,5X3 MOS

Aged Bronze naturale

mosaico 1,5x3 30x30 cm

FLOWTECH BURNISHED NAT.6MM 1,5x3 MOS

Burnished naturale

mosaico 1,5x3 30x30 cm

Reference standard E.N. 14411 . Appendix G. Group BⅠa. UGL
Test method
Reference value
Declared value
Download
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to staining
ISO-10545-14
-
Cl. 4-5
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Slip resistance with shoes
DIN-51130:2010
-
R9
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
Pendulum friction test
BS-7976
-
> 36 wet

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness < 7,5 mm)
ISO-10545-4
≥700 Newton
average value 1350 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to staining
ISO-10545-14
-
Cl. 4-5
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
Slip resistance with shoes
DIN-51130:2010
-
R9
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
Release of hazardous substances
DM-1-2-2007-Reg-CE-1935-2004
Valore dichiarato per superfici gl con impieghi su piani di lavoro / Declared value for gl surfaces used on worktops / valeur déclarée Pour surfaces gl utilisées sur plans de travail /angegebener wert für Gl oberflächen zum gebrauch als arbeitsplatten / valor declarado Para acabados gl utilizados para superficies de trabajo / заявленное Значение для глазурованных поверхностей, с использованием на рабочих столах
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

If you want, we'll keep you updated on the latest news about products and events

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

Italiano Chiudi / Close