B&W

A meeting point in essential chromatic dualism

B&W - Black&White | Floor Gres | Florim Ceramiche S.p.A.
The essential chromatic dualism reinterprets rational architecture

The essential chromatic dualism reinterprets rational architecture

Thanks to a rigorous and simple but visually high impact design, Black & White perfectly interprets chromatic opposites with a decisive but never impersonal approach to give essential settings a fresh look with new suggestions in perfect balance. In Black &White, rational architecture finds the fine porcelain stoneware interpretation of a stylistic trend that seeks a meeting point in essential chromatic dualism.

Colors

White

Black

Sizes

160x320 cm 63"x126"

160x160 cm 63"x63"

120x240 cm 48"x95"

120x120 cm 48"x48"

80x160 cm 32"x63"

80x80 cm 32"x32"

60x120 cm 24"x48"

60x60 cm 24"x24"

60x240 cm 24"x95"

30x60 cm 12"x24"

modulo muretto sfalsato 7,5x15 30x30 cm Modulo Muretto Sfalsato 3"x6" 12"x12"

modulo muretto sfalsato magnum 7,5x15 30x30 cm Modulo Muretto Sfalsato Magnum 12"x12"

mosaico 1,5x3 30x30 cm Mosaico 1/2x11/8" 12"x12"

mosaico 7,5x7,5 30x30 cm Mosaico 3"x3" 12"x12"

mosaico magnum 1,5x3 30x30 cm Mosaico Magnum 1/2x11/8" 12"x12"

mosaico magnum 7,5x7,5 30x30 cm Mosaico Magnum 3"x3" 12"x12"

Thickness

6,00 mm

10,00 mm

Surfaces

MATTE

POLISHED

Colors:

Size:

Thickness:

Surface:

Modulo Muretto Sfalsato

B&W WHITE LEV.7,5x15 MUR.SFALS.30X30

White levigata

modulo muretto sfalsato 7,5x15 30x30 cm

B&W BLACK LEV.7,5x15 MUR.SFALS.30X30

Black levigata

modulo muretto sfalsato 7,5x15 30x30 cm

B&W WHITE NAT.7,5x15 MUR.SFALS.30X30

White naturale

modulo muretto sfalsato 7,5x15 30x30 cm

B&W BLACK NAT.7,5x15 MUR.SFALS.30X30

Black naturale

modulo muretto sfalsato 7,5x15 30x30 cm

Modulo Muretto Sfalsato Magnum

B&W WHITE NATURALE 7,5x15 MURETTO 30X30

White naturale

modulo muretto sfalsato magnum 7,5x15 30x30 cm

B&W BLACK NATURALE 7,5x15 MURETTO 30X30

Black naturale

modulo muretto sfalsato magnum 7,5x15 30x30 cm

B&W WHITE LEVIGATO 7,5x15 MURETTO 30X30

White levigata

modulo muretto sfalsato magnum 7,5x15 30x30 cm

Mosaico

B&W WHITE LEV.7,5x7,5 MOSAICO 30X30

White levigata

mosaico 7,5x7,5 30x30 cm

B&W BLACK LEV.7,5x7,5 MOSAICO 30X30

Black levigata

mosaico 7,5x7,5 30x30 cm

B&W WHITE NAT.7,5x7,5 MOSAICO 30X30

White naturale

mosaico 7,5x7,5 30x30 cm

B&W BLACK NAT.7,5x7,5 MOSAICO 30X30

Black naturale

mosaico 7,5x7,5 30x30 cm

B&W WHITE LEV.1,5x3 MOSAICO 30X30

White levigata

mosaico 1,5x3 30x30 cm

B&W BLACK LEV.1,5x3 MOSAICO 30X30X30

Black levigata

mosaico 1,5x3 30x30 cm

B&W WHITE NAT.1,5x3 MOSAICO 30X30

White naturale

mosaico 1,5x3 30x30 cm

B&W BLACK NAT.1,5x3 MOSAICO 30X30

Black naturale

mosaico 1,5x3 30x30 cm

Mosaico Magnum

B&W WHITE NATURALE 7,5x7,5 MOSAICO 30X30

White naturale

mosaico magnum 7,5x7,5 30x30 cm

B&W BLACK NATURALE 7,5x7,5 MOSAICO 30X30

Black naturale

mosaico magnum 7,5x7,5 30x30 cm

B&W WHITE LEVIGATO 7,5x7,5 MOSAICO 30X30

White levigata

mosaico magnum 7,5x7,5 30x30 cm

B&W BLACK LEVIGATO 7,5x7,5 MOSAICO 30X30

Black levigata

mosaico magnum 7,5x7,5 30x30 cm

B&W WHITE NATURALE 1,5x3 MOSAICO

White naturale

mosaico magnum 1,5x3 30x30 cm

B&W BLACK NATURALE 1,5x3 MOSAICO

Black naturale

mosaico magnum 1,5x3 30x30 cm

B&W WHITE LEVIGATO 1,5x3 MOSAICO

White levigata

mosaico magnum 1,5x3 30x30 cm

B&W BLACK LEVIGATO 1,5x3 MOSAICO

Black levigata

mosaico magnum 1,5x3 30x30 cm

Reference standard E.N. 14411 . Appendix G. Group BⅠa. UGL
Test method
Reference value
Declared value
Download
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness < 7,5 mm)
ISO-10545-4
≥700 Newton
average value 1350 N*
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to staining
ISO-10545-14
-
Cl. 4
naturale
Resistance to staining
ISO-10545-14
-
Cl. 3
levigata
Determinazione della cessione di piombo e cadmio
ISO-10545-15
-
ASSENTE / ABSENT / ABSENT/ ABWESEND / AUSENTE / несуществующее
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULB
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHB
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42
naturale

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
avregae value 50 N/mm2
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to staining
ISO-10545-14
-
Cl. 4-5
naturale
Resistance to staining
ISO-10545-14
-
Cl. 3-4
levigata
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULB
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42
naturale

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

If you want, we'll keep you updated on the latest news about products and events

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

Italiano Chiudi / Close