Buildtech/

Maximum possibility of combinations in support of the strictest design choices

A developing design solution

A developing design solution

A container of various color variations and tactile finishes that are always current, able to communicate through material suggestions and find the most appropriate solution to meet the technical and aesthetic requirements of the most extreme architectural applications. Coherent and consistent research has allowed an intuitive approach to be developed, made up of interests and curiosity in the possible ways of living.

Buildtech - Porcelain tiles | Floor Gres | Florim Ceramiche S.p.A.
Buildtech - Porcelain tiles | Floor Gres | Florim Ceramiche S.p.A.
Buildtech - Porcelain tiles | Floor Gres | Florim Ceramiche S.p.A.

The interpreter of an essential but sophisticated style that stands out for the possibility of multiple combinations of effects and different surfaces designed to integrate and be a key element of the most attractive designs. The range of fine porcelain stoneware proposed by Buildtech is expressed through modular sizes that allow brand new patterns and laying surfaces to be created, whereas the thicker slabs meet the needs of large urban and industrial designs. The proposed surfaces allow interior and exterior spaces to be covered in necessary and continuous harmony with the existing environment.

Buildtech - Porcelain tiles | Floor Gres | Florim Ceramiche S.p.A.
Buildtech - Porcelain tiles | Floor Gres | Florim Ceramiche S.p.A.
Buildtech - Porcelain tiles | Floor Gres | Florim Ceramiche S.p.A.

Colors

TU

Build White TU

Build Bone TU

Build Sand TU

Build Clay TU

Build Mud TU

Build Coal TU

SA

Build White SA

Build Bone SA

Build Sand SA

Build Clay SA

Build Mud SA

Build Coal SA

GG

Build White GG

Build Bone GG

Build Sand GG

Build Clay GG

Build Mud GG

Build Coal GG

Sizes

120x120 cm 48"x48"

120x240 cm 48"x95"

80x80 cm 32"x32"

60x120 cm 24"x48"

60x60 cm 24"x24"

60x240 cm 24"x95"

40x80 cm 16"x32"

30x60 cm 12"x24"

modulo listello sfalsato 21x40 cm Modulo Listello Sfalsato 81/4"x16"

modulo muretto sfalsato 7,5x15 30x30 cm Modulo Muretto Sfalsato 3"x6" 12"x12"

mosaico 3x3 30x30 cm Mosaico 11/8"x11/8" 12"x12"

Thickness

10,00 mm

20,00 mm

6,00 mm

Surfaces*

MATTE

POLISHED

SLATE-HAMMERED

R+PTV

* To find out more about the meaning of each surface, read the glossary at the following link www.florim.com/en/surfaces/

Due to the different production technologies, contiguous installation of products with different thickness may give a non-homogeneous result. For this reason we do not recommend this option. 

Colors:

Size:

Thickness:

Surface:

Modulo Listello Sfalsato

BUILDTECH TU WHITE NAT.LIST.SFALS 21x40

Build White TU naturale

modulo listello sfalsato 21x40 cm

BUILDTECH TU BONE NAT.LIST.SFALS 21x40

Build Bone TU naturale

modulo listello sfalsato 21x40 cm

BUILDTECH TU SAND NAT.LIST.SFALS 21x40

Build Sand TU naturale

modulo listello sfalsato 21x40 cm

BUILDTECH TU CLAY NAT.LIST.SFALS 21x40

Build Clay TU naturale

modulo listello sfalsato 21x40 cm

BUILDTECH TU MUD NAT.LIST.SFALS 21x40

Build Mud TU naturale

modulo listello sfalsato 21x40 cm

BUILDTECH TU COAL NAT.LIST.SFALS 21x40

Build Coal TU naturale

modulo listello sfalsato 21x40 cm

BUILDTECH TU WHITE LEV.LIST.SFALS 21x40

Build White TU levigata

modulo listello sfalsato 21x40 cm

BUILDTECH TU BONE LEV.LIST.SFALS 21x40

Build Bone TU levigata

modulo listello sfalsato 21x40 cm

BUILDTECH TU SAND LEV.LIST.SFALS 21x40

Build Sand TU levigata

modulo listello sfalsato 21x40 cm

BUILDTECH TU CLAY LEV.LIST.SFALS 21x40

Build Clay TU levigata

modulo listello sfalsato 21x40 cm

BUILDTECH TU MUD LEV.LIST.SFALS 21x40

Build Mud TU levigata

modulo listello sfalsato 21x40 cm

BUILDTECH TU COAL LEV.LIST.SFALS 21x40

Build Coal TU levigata

modulo listello sfalsato 21x40 cm

BUILDTECH SA WHITE NAT.LIST.SFALS 21x40

Build White SA naturale

modulo listello sfalsato 21x40 cm

BUILDTECH SA BONE NAT.LIST.SFALS 21x40

Build Bone SA naturale

modulo listello sfalsato 21x40 cm

BUILDTECH SA SAND NAT.LIST.SFALS 21x40

Build Sand SA naturale

modulo listello sfalsato 21x40 cm

BUILDTECH SA MUD NAT.LIST.SFALS 21x40

Build Mud SA naturale

modulo listello sfalsato 21x40 cm

BUILDTECH SA COAL NAT.LIST.SFALS 21x40

Build Coal SA naturale

modulo listello sfalsato 21x40 cm

BUILDTECH GG WHITE NAT.LIST.SFALS 21x40

Build White GG naturale

modulo listello sfalsato 21x40 cm

BUILDTECH GG BONE NAT.LIST.SFALS 21x40

Build Bone GG naturale

modulo listello sfalsato 21x40 cm

BUILDTECH GG SAND NAT.LIST.SFALS 21x40

Build Sand GG naturale

modulo listello sfalsato 21x40 cm

BUILDTECH GG MUD NAT.LIST.SFALS 21x40

Build Mud GG naturale

modulo listello sfalsato 21x40 cm

BUILDTECH GG COAL NAT.LIST.SFALS 21x40

Build Coal GG naturale

modulo listello sfalsato 21x40 cm

BUILDTECH GG WHITE LEV.LIST.SFALS 21x40

Build White GG levigata

modulo listello sfalsato 21x40 cm

BUILDTECH GG BONE LEV.LIST.SFALS 21x40

Build Bone GG levigata

modulo listello sfalsato 21x40 cm

BUILDTECH GG SAND LEV.LIST.SFALS 21x40

Build Sand GG levigata

modulo listello sfalsato 21x40 cm

BUILDTECH GG CLAY LEV.LIST.SFALS 21x40

Build Clay GG levigata

modulo listello sfalsato 21x40 cm

BUILDTECH GG MUD LEV.LIST.SFALS 21x40

Build Mud GG levigata

modulo listello sfalsato 21x40 cm

BUILDTECH GG COAL LEV.LIST.SFALS 21x40

Build Coal GG levigata

modulo listello sfalsato 21x40 cm

Modulo Muretto Sfalsato

BUILDTECH TU WHITE NAT.MATTONCINO 7,5X15

Build White TU naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH TU BONE NAT.MATTONCINO 7,5X15

Build Bone TU naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH TU SAND NAT.MATTONCINO 7,5X15

Build Sand TU naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH TU CLAY NAT.MATTONCINO 7,5X15

Build Clay TU naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH TU MUD NAT.MATTONCINO 7,5X15

Build Mud TU naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH TU COAL NAT.MATTONCINO 7,5X15

Build Coal TU naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH TU WHITE LEV.MATTONCINO 7,5X15

Build White TU levigata

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH TU BONE LEV.MATTONCINO 7,5X15

Build Bone TU levigata

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH TU SAND LEV.MATTONCINO 7,5X15

Build Sand TU levigata

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH TU CLAY LEV.MATTONCINO 7,5X15

Build Clay TU levigata

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH TU MUD LEV.MATTONCINO 7,5X15

Build Mud TU levigata

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH TU COAL LEV.MATTONCINO 7,5X15

Build Coal TU levigata

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH SA WHITE NAT.MATTONCINO 7,5X15

Build White SA naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH SA BONE NAT.MATTONCINO 7,5X15

Build Bone SA naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH SA SAND NAT.MATTONCINO 7,5X15

Build Sand SA naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH SA CLAY NAT.MATTONCINO 7,5X15

Build Clay SA naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH SA MUD NAT.MATTONCINO 7,5X15

Build Mud SA naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH SA COAL NAT.MATTONCINO 7,5X15

Build Coal SA naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH GG WHITE NAT.MATTONCINO 7,5X15

Build White GG naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH GG BONE NAT.MATTONCINO 7,5X15

Build Bone GG naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH GG SAND NAT.MATTONCINO 7,5X15

Build Sand GG naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH GG MUD NAT.MATTONCINO 7,5X15

Build Mud GG naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH GG WHITE LEV.MATTONCINO 7,5X15

Build White GG levigata

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH GG BONE LEV.MATTONCINO 7,5X15

Build Bone GG levigata

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH GG SAND LEV.MATTONCINO 7,5X15

Build Sand GG levigata

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH GG CLAY LEV.MATTONCINO 7,5X15

Build Clay GG levigata

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH GG MUD LEV.MATTONCINO 7,5X15

Build Mud GG levigata

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH GG COAL LEV.MATTONCINO 7,5X15

Build Coal GG levigata

modulo muretto sfalsato 7,5x15 30x30 cm

Mosaico

BUILDTECH TU WHITE NAT MOSAICO 3X3

Build White TU naturale

mosaico 3x3 30x30 cm

BUILDTECH TU BONE NAT MOSAICO 3X3

Build Bone TU naturale

mosaico 3x3 30x30 cm

BUILDTECH TU SAND NAT MOSAICO 3X3

Build Sand TU naturale

mosaico 3x3 30x30 cm

BUILDTECH TU CLAY NAT MOSAICO 3X3

Build Clay TU naturale

mosaico 3x3 30x30 cm

BUILDTECH TU MUD NAT MOSAICO 3X3

Build Mud TU naturale

mosaico 3x3 30x30 cm

BUILDTECH TU COAL NAT MOSAICO 3X3

Build Coal TU naturale

mosaico 3x3 30x30 cm

BUILDTECH TU WHITE LEV MOSAICO 3X3

Build White TU levigata

mosaico 3x3 30x30 cm

BUILDTECH TU BONE LEV MOSAICO 3X3

Build Bone TU levigata

mosaico 3x3 30x30 cm

BUILDTECH TU SAND LEV MOSAICO 3X3

Build Sand TU levigata

mosaico 3x3 30x30 cm

BUILDTECH TU CLAY LEV MOSAICO 3X3

Build Clay TU levigata

mosaico 3x3 30x30 cm

BUILDTECH TU MUD LEV MOSAICO 3X3

Build Mud TU levigata

mosaico 3x3 30x30 cm

BUILDTECH TU COAL LEV MOSAICO 3X3

Build Coal TU levigata

mosaico 3x3 30x30 cm

BUILDTECH SA WHITE NAT MOSAICO 3X3

Build White SA naturale

mosaico 3x3 30x30 cm

BUILDTECH SA BONE NAT MOSAICO 3X3

Build Bone SA naturale

mosaico 3x3 30x30 cm

BUILDTECH SA SAND NAT MOSAICO 3X3

Build Sand SA naturale

mosaico 3x3 30x30 cm

BUILDTECH SA CLAY NAT MOSAICO 3X3

Build Clay SA naturale

mosaico 3x3 30x30 cm

BUILDTECH SA MUD NAT MOSAICO 3X3

Build Mud SA naturale

mosaico 3x3 30x30 cm

BUILDTECH SA COAL NAT MOSAICO 3X3

Build Coal SA naturale

mosaico 3x3 30x30 cm

BUILDTECH GG WHITE NAT MOSAICO 3X3

Build White GG naturale

mosaico 3x3 30x30 cm

BUILDTECH GG BONE NAT MOSAICO 3X3

Build Bone GG naturale

mosaico 3x3 30x30 cm

BUILDTECH GG SAND NAT MOSAICO 3X3

Build Sand GG naturale

mosaico 3x3 30x30 cm

BUILDTECH GG CLAY NAT MOSAICO 3X3

Build Clay GG naturale

mosaico 3x3 30x30 cm

BUILDTECH GG MUD NAT MOSAICO 3X3

Build Mud GG naturale

mosaico 3x3 30x30 cm

BUILDTECH GG COAL NAT MOSAICO 3X3

Build Coal GG naturale

mosaico 3x3 30x30 cm

BUILDTECH GG WHITE LEV MOSAICO 3X3

Build White GG levigata

mosaico 3x3 30x30 cm

BUILDTECH GG BONE LEV MOSAICO 3X3

Build Bone GG levigata

mosaico 3x3 30x30 cm

BUILDTECH GG SAND LEV MOSAICO 3X3

Build Sand GG levigata

mosaico 3x3 30x30 cm

BUILDTECH GG CLAY LEV MOSAICO 3X3

Build Clay GG levigata

mosaico 3x3 30x30 cm

BUILDTECH GG MUD LEV MOSAICO 3X3

Build Mud GG levigata

mosaico 3x3 30x30 cm

BUILDTECH GG COAL LEV MOSAICO 3X3

Build Coal GG levigata

mosaico 3x3 30x30 cm

Reference standard E.N. 14411 . Appendix G. Group BⅠa. UGL
Test method
Reference value
Declared value
Download
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
±5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
±0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
±0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
±0,35%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
MATTE - SLATE-HAMMERED
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
MATTE - SLATE-HAMMERED
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULB
POLISHED
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHB
POLISHED
Slip resistance with shoes
DIN-51130:2010
-
R11
SLATE-HAMMERED
Slip resistance with shoes
DIN-51130:2010
-
R10
MATTE
Barefoot slip resistance
DIN-51097
-
Cl. A+B+C
SLATE-HAMMERED
Barefoot slip resistance
DIN-51097
-
Cl. A+B
MATTE
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
>0,42 wet
MATTE - SLATE-HAMMERED
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Pendulum friction test
BS-7976
-
> 0,40 wet
SLATE-HAMMERED
Resistance to staining
ISO-10545-14
-
3
POLISHED
Resistance to staining
ISO-10545-14
-
4

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
±5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
±0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
±0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
±0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 14000
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Slip resistance with shoes
DIN-51130:2010
-
R11
SLATE-HAMMERED
Barefoot slip resistance
DIN-51097
-
Cl. A+B+C
SLATE-HAMMERED
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
>0,42 wet
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Pendulum friction test
BS-7976
-
> 0,40 wet
SLATE-HAMMERED
Resistance to staining
ISO-10545-14
-
4

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
±5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
±0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
±0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
±0,2%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness < 7,5 mm)
ISO-10545-4
≥700 Newton
average value 1350 N *
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
MATTE
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
MATTE
Slip resistance with shoes
DIN-51130:2010
-
R10
R+PTV
Barefoot slip resistance
DIN-51097
-
Cl. A+B
R+PTV
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Pendulum friction test
BS-7976
-
>36 wet
R+PTV
Resistance to staining
ISO-10545-14
-
4
Resistance to staining
ISO-10545-14
-
3
POLISHED
Release of hazardous substances
DM-1-2-2007-Reg-CE-1935-2004
Valore dichiarato per superfici gl con impieghi su piani di lavoro / Declared value for gl surfaces used on worktops / valeur déclarée Pour surfaces gl utilisées sur plans de travail /angegebener wert für Gl oberflächen zum gebrauch als arbeitsplatten / valor declarado Para acabados gl utilizados para superficies de trabajo / заявленное Значение для глазурованных поверхностей, с использованием на рабочих столах
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

If you want, we'll keep you updated on the latest news about products and events

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

Italiano Chiudi / Close