Buildtech/2.0

The brutalism of the cement and the expressive vigor of the bold colors

Buildtech/ 2.0 assures the realization of ever-current projects

Buildtech/ 2.0 assures the realization of ever-current projects

Buildtech/ , container of Gres fine porcelain stoneware capable of setting up a direct dialog with the designer, evolves into Buildtech/ 2.0.  The collection expands its design range through a new proposal promoting the powerful coupling of the neutrality of cement with the boldness of saturated colors destined for architecture.

Buildtech/ 2.0 - Cement Effect Tiles | Floor Gres | Florim Ceramiche S.p.A.
Buildtech/ 2.0 - Cement Effect Tiles | Floor Gres | Florim Ceramiche S.p.A.
Buildtech/ 2.0 - Cement Effect Tiles | Floor Gres | Florim Ceramiche S.p.A.

To the four colors, White, Bone, Mud and Coal in Tinta Unita, Granigliata and Cemento, 10 solid bold colors are being added, only intensifying the ‘brutality’.
 

Discover all the new collections

Buildtech/ 2.0 - Cement Effect Tiles | Floor Gres | Florim Ceramiche S.p.A.
Buildtech/ 2.0 - Cement Effect Tiles | Floor Gres | Florim Ceramiche S.p.A.
Buildtech/ 2.0 - Cement Effect Tiles | Floor Gres | Florim Ceramiche S.p.A.

 

 

Colors

TU

Build White TU

Build Bone TU

Build Mud TU

Build Coal TU

GG

Build White GG

Build Bone GG

Build Mud GG

Build Coal GG

CE

Build White CE

Build Bone CE

Build Mud CE

Build Coal CE

Bold Colors

Teal

Bottle

Mustard

Cream

Midnight

Sky

Scarlet

Crimson

Burgundy

Fuchsia

Sizes

160x160 cm 63"x63"

160x320 cm 63"x126"

120x120 cm 48"x48"

120x240 cm 48"x95"

120x280 cm 48"x111"

80x80 cm 32"x32"

60x120 cm 24"x48"

60x60 cm 24"x24"

40x80 cm 16"x32"

30x60 cm 12"x24"

modulo listello sfalsato 21x40 cm Modulo Listello Sfalsato 81/4"x16"

modulo muretto sfalsato 7,5x15 30x30 cm Modulo Muretto Sfalsato 3"x6" 12"x12"

mosaico 3x3 30x30 cm Mosaico 11/8"x11/8" 12"x12"

mosaico 7,5x7,5 30x30 cm Mosaico 3"x3" 12"x12"

Thickness

10,00 mm

20,00 mm

6,00 mm

Surfaces*

MATTE

SLATE-HAMMERED

POLISHED

SOFT

R+PTV

GLOSSY

* To find out more about the meaning of each surface, please consult the glossary at www.florim.com/en/surfaces



Due to the different production technologies, combining products of different thicknesses contiguously can present a lack of uniformity and is therefore not recommended. 

Colors:

Size:

Thickness:

Surface:

Modulo Listello Sfalsato

BUILDTECH 2.0 CE WHITE MAT LIS.SF 21X40

Build White CE naturale

modulo listello sfalsato 21x40 cm

BUILDTECH 2.0 CE BONE MAT LIS.SF 21X40

Build Bone CE naturale

modulo listello sfalsato 21x40 cm

BUILDTECH 2.0 CE MUD MAT LIS.SF 21X40

Build Mud CE naturale

modulo listello sfalsato 21x40 cm

BUILDTECH 2.0 CE COAL MAT LIS.SF 21X40

Build Coal CE naturale

modulo listello sfalsato 21x40 cm

BUILDTECH 2.0 CE WHITE SOFT LIS.SF 21X40

Build White CE soft

modulo listello sfalsato 21x40 cm

BUILDTECH 2.0 CE BONE SOFT LIS.SF 21X40

Build Bone CE soft

modulo listello sfalsato 21x40 cm

BUILDTECH 2.0 CE MUD SOFT LIS.SF 21X40

Build Mud CE soft

modulo listello sfalsato 21x40 cm

BUILDTECH 2.0 CE COAL SOFT LIS.SF 21X40

Build Coal CE soft

modulo listello sfalsato 21x40 cm

Modulo Muretto Sfalsato

BUILDTECH 2.0 CE WHITE MAT MATTON 7,5X15

Build White CE naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH 2.0 CE BONE MAT MATTON 7,5X15

Build Bone CE naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH 2.0 CE MUD MAT MATTON 7,5X15

Build Mud CE naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH 2.0 CE COAL MAT MATTON 7,5X15

Build Coal CE naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH 2.0 CE WHITE SOFT MATTON7,5X15

Build White CE soft

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH 2.0 CE BONE SOFT MATTON 7,5X15

Build Bone CE soft

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH 2.0 CE MUD SOFT MATTON 7,5X15

Build Mud CE soft

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH 2.0 CE COAL SOFT MATTON 7,5X15

Build Coal CE soft

modulo muretto sfalsato 7,5x15 30x30 cm

Modulo Muretto Sfalsato Magnum

BUILDTECH 2.0 CE WHI MAT 6MM MURET7,5X15

Build White CE naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH 2.0 CE BON MAT 6MM MURET7,5X15

Build Bone CE naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH 2.0 CE MUD MAT 6MM MURET7,5X15

Build Mud CE naturale

modulo muretto sfalsato 7,5x15 30x30 cm

BUILDTECH 2.0 CE COA MAT 6MM MURET7,5X15

Build Coal CE naturale

modulo muretto sfalsato 7,5x15 30x30 cm

Mosaico

BUILDTECH 2.0 CE WHITE MAT MOSAICO 3X3

Build White CE naturale

mosaico 3x3 30x30 cm

BUILDTECH 2.0 CE BONE MAT MOSAICO 3X3

Build Bone CE naturale

mosaico 3x3 30x30 cm

BUILDTECH 2.0 CE MUD MAT MOSAICO 3X3

Build Mud CE naturale

mosaico 3x3 30x30 cm

BUILDTECH 2.0 CE COAL MAT MOSAICO 3X3

Build Coal CE naturale

mosaico 3x3 30x30 cm

BUILDTECH 2.0 CE WHITE SOFT MOSAICO 3X3

Build White CE soft

mosaico 3x3 30x30 cm

BUILDTECH 2.0 CE BONE SOFT MOSAICO 3X3

Build Bone CE soft

mosaico 3x3 30x30 cm

BUILDTECH 2.0 CE MUD SOFT MOSAICO 3X3

Build Mud CE soft

mosaico 3x3 30x30 cm

BUILDTECH 2.0 CE COAL SOFT MOSAICO 3X3

Build Coal CE soft

mosaico 3x3 30x30 cm

Mosaico Magnum

BUILDTECH 2.0 CE WHIT MAT 6MM MOS7,5X7,5

Build White CE naturale

mosaico 7,5x7,5 30x30 cm

BUILDTECH 2.0 CE BONE MAT 6MM MOS7,5X7,5

Build Bone CE naturale

mosaico 7,5x7,5 30x30 cm

BUILDTECH 2.0 CE MUD MAT 6MM MOS7,5X7,5

Build Mud CE naturale

mosaico 7,5x7,5 30x30 cm

BUILDTECH 2.0 CE COAL MAT 6MM MOS7,5X7,5

Build Coal CE naturale

mosaico 7,5x7,5 30x30 cm

Reference standard E.N. 14411 . Appendix G. Group BⅠa. UGL
Test method
Reference value
Declared value
Download
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
±5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
±0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
±0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
±0,35%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
MATTE - SLATE-HAMMERED
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
MATTE - SLATE-HAMMERED
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULB
POLISHED
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHB
POLISHED
Slip resistance with shoes
DIN-51130:2010
-
R11
SLATE-HAMMERED
Slip resistance with shoes
DIN-51130:2010
-
R10
MATTE
Barefoot slip resistance
DIN-51097
-
Cl. A+B+C
SLATE-HAMMERED
Barefoot slip resistance
DIN-51097
-
Cl. A+B
MATTE
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
>0,42 wet
MATTE - SLATE-HAMMERED
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Pendulum friction test
BS-7976
-
> 0,40 wet
SLATE-HAMMERED
Resistance to staining
ISO-10545-14
-
3
POLISHED
Resistance to staining
ISO-10545-14
-
4

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
±5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
±0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
±0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
±0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 14000
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Slip resistance with shoes
DIN-51130:2010
-
R11
SLATE-HAMMERED
Barefoot slip resistance
DIN-51097
-
Cl. A+B+C
SLATE-HAMMERED
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
>0,42 wet
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Pendulum friction test
BS-7976
-
> 0,40 wet
SLATE-HAMMERED
Resistance to staining
ISO-10545-14
-
4

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Ceramic tiles undergo a compacting thermal treatment that ensures resistance and durability. The low level of water absorption makes the slabs frost resistant. This could result in superficial water stagnations even if materials are installed in a workmanlike manner.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
±5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
±0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
±0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
±0,2%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness < 7,5 mm)
ISO-10545-4
≥700 Newton
average value 1350 N *
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2 *
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA-ULB
Slip resistance with shoes
DIN-51130:2010
-
R10
R+PTV
Barefoot slip resistance
DIN-51097
-
Cl. A+B
R+PTV
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet NATURALE - R+PTV
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Pendulum friction test
BS-7976
-
>36 wet
R+PTV
Resistance to staining
ISO-10545-14
-
4
POLISHED
Resistance to staining
ISO-10545-14
-
4-5
Release of hazardous substances
DM-1-2-2007-Reg-CE-1935-2004
Valore dichiarato per superfici gl con impieghi su piani di lavoro / Declared value for gl surfaces used on worktops / valeur déclarée Pour surfaces gl utilisées sur plans de travail /angegebener wert für Gl oberflächen zum gebrauch als arbeitsplatten / valor declarado Para acabados gl utilizados para superficies de trabajo / заявленное Значение для глазурованных поверхностей, с использованием на рабочих столах
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

* Test performed on 80x80cm size

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

If you want, we'll keep you updated on the latest news about products and events

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

Italiano Chiudi / Close