Rock Salt

 The natural charm of the tactile materiality of salt crystals

With Rock Salt of Cerim, it’s possible to create comfortable spaces where you can find peace away from the frenzy of daily life 

With Rock Salt of Cerim, it’s possible to create comfortable spaces where you can find peace away from the frenzy of daily life 

Inspired by the aesthetics of large blocks of rock salt extracted from underground mines and also used for the construction of walls and salt crystals, the Rock Salt of Cerim collection reimagines the taste of an evocative naturalness capable of making living spaces contemporary.

Rock Salt of Cerim - Porcelain Tiles | Florim Ceramiche S.p.A.
Rock Salt of Cerim - Porcelain Tiles | Florim Ceramiche S.p.A.
Rock Salt of Cerim - Porcelain Tiles | Florim Ceramiche S.p.A.

The range offers 5 different chromatic variations enriched with desaturated, deep, and defined veining. Fresh shades, like that of the white, gray, and sage colors, are accompanied by warmer tones, like the dove gray and red, returning the allure of the luster or tactile materiality of natural crystals, depending on their finish.
 

Discover all the new collections

Rock Salt of Cerim - Porcelain Tiles | Florim Ceramiche S.p.A.
Rock Salt of Cerim - Porcelain Tiles | Florim Ceramiche S.p.A.
Rock Salt of Cerim - Porcelain Tiles | Florim Ceramiche S.p.A.

TECHNICAL NOTES

All of the collection’s chromatic variations are offered both in 10 mm thickness (in 30x60, 60x60 and 60x120 cm formats) and 6 mm (in the Magnum 60x120, 120x120 and 120x240 cm formats), in Natural R10 and Glossy finishes.The range is enhanced with an additional thickness of 20 mm for outdoor use, available in the White Gold and Celtic Grey variations in Bush-hammered R10 finish (in the 60x60 and 60x120 cm formats).

Colors

White Gold

Celtic Grey

Danish Smoke

Maui Green

Hawaiian Red

Sizes

120x240 cm 48"x95"

120x120 cm 48"x48"

60x120 cm 24"x48"

60x60 cm 24"x24"

30x60 cm 12"x24"

modulo listello sfalsato mix 15x60 cm Modulo Listello Sfalsato 6"x24"

modulo muretto sfalsato 7,5x15 30x30 cm Modulo Muretto Sfalsato 3"x6" 12"x12"

mosaico 3x3 30x30 cm Mosaico 11/8"x11/8" 12"x12"

mosaico 3d 5x30 30x30 cm Mosaico 3d 2"x12" 12"x12"

mosaico 7,5x7,5 30x30 cm Mosaico 3"x3" 12"x12"

Thickness

10,00 mm

20,00 mm

6,00 mm

Surfaces*

MATTE

SHINY

BUSH-HAMMERED

MATTE - SHINY

 * To find out more about the meaning of each surface, please consult the glossary at www.florim.com/en/surfaces

 Due to the different production technologies, combining products of different thicknesses contiguously can present a lack of uniformity and is therefore not recommended.

Colors:

Size:

Thickness:

Surface:

Modulo Listello Sfalsato Mix

ROCK SALT WHITE GOLD LI.SF.15X60 NAT LUC

White Gold naturale---lucida

modulo listello sfalsato mix 15x60 cm

ROCK SALT CELTIC GRE LI.SF.15X60 NAT LUC

Celtic Grey naturale---lucida

modulo listello sfalsato mix 15x60 cm

ROCK SALT DANISH SMO LI.SF.15X60 NAT LUC

Danish Smoke naturale---lucida

modulo listello sfalsato mix 15x60 cm

ROCK SALT MAUI GREEN LI.SF.15X60 NAT LUC

Maui Green naturale---lucida

modulo listello sfalsato mix 15x60 cm

ROCK SALT HAWAI RED LI.SF.15X60 NAT LUC

Hawaiian Red naturale---lucida

modulo listello sfalsato mix 15x60 cm

Modulo Muretto Sfalsato Magnum

ROCK SALT WH.GOLD NAT 6MM7,5x15 MUR30X30

White Gold naturale

modulo muretto sfalsato 7,5x15 30x30 cm

ROCK SALT CE.GREY NAT 6MM7,5x15 MUR30X30

Celtic Grey naturale

modulo muretto sfalsato 7,5x15 30x30 cm

ROCK SALT WH.GOLD LUC 6MM7,5x15 MUR30X30

White Gold lucida

modulo muretto sfalsato 7,5x15 30x30 cm

ROCK SALT CE.GREY LUC 6MM7,5x15 MUR30X30

Celtic Grey lucida

modulo muretto sfalsato 7,5x15 30x30 cm

ROCK SALT DA.SMO. NAT 6MM7,5x15 MUR30X30

Danish Smoke naturale

modulo muretto sfalsato 7,5x15 30x30 cm

ROCK SALT DA.SMO. LUC 6MM7,5x15 MUR30X30

Danish Smoke lucida

modulo muretto sfalsato 7,5x15 30x30 cm

ROCK SALT MA.GRE. NAT 6MM7,5x15 MUR30X30

Maui Green naturale

modulo muretto sfalsato 7,5x15 30x30 cm

ROCK SALT MA.GRE. LUC 6MM7,5x15 MUR30X30

Maui Green lucida

modulo muretto sfalsato 7,5x15 30x30 cm

ROCK SALT HAW.RED NAT 6MM7,5x15 MUR30X30

Hawaiian Red naturale

modulo muretto sfalsato 7,5x15 30x30 cm

ROCK SALT HAW.RED LUC 6MM7,5x15 MUR30X30

Hawaiian Red lucida

modulo muretto sfalsato 7,5x15 30x30 cm

Mosaico

ROCK SALT WHITE GOLD 3x3 MOS 30X30 LUC

White Gold lucida

mosaico 3x3 30x30 cm

ROCK SALT WHITE GOLD 3x3 MOS 30X30 NAT

White Gold naturale

mosaico 3x3 30x30 cm

ROCK SALT CELTIC GREY 3x3 MOS 30X30 LUC

Celtic Grey lucida

mosaico 3x3 30x30 cm

ROCK SALT CELTIC GREY 3x3 MOS 30X30 NAT

Celtic Grey naturale

mosaico 3x3 30x30 cm

ROCK SALT DANISH SMOKE 3x3 MOS 30X30 NAT

Danish Smoke naturale

mosaico 3x3 30x30 cm

ROCK SALT DANISH SMOKE 3x3 MOS 30X30 LUC

Danish Smoke lucida

mosaico 3x3 30x30 cm

ROCK SALT MAUI GREEN 3x3 MOS 30X30 NAT

Maui Green naturale

mosaico 3x3 30x30 cm

ROCK SALT MAUI GREEN 3x3 MOS 30X30 LUC

Maui Green lucida

mosaico 3x3 30x30 cm

ROCK SALT HAWAIIAN RED 3x3 MOS 30X30 NAT

Hawaiian Red naturale

mosaico 3x3 30x30 cm

ROCK SALT HAWAIIAN RED 3x3 MOS 30X30 LUC

Hawaiian Red lucida

mosaico 3x3 30x30 cm

Mosaico 3d

ROCK SALT WHITE GOLD MOS 3D LUC 30X30

White Gold lucida

mosaico 3d 5x30 30x30 cm

ROCK SALT WHITE GOLD MOS 3D NAT 30X30

White Gold naturale

mosaico 3d 5x30 30x30 cm

ROCK SALT CELTIC GREY MOS 3D NAT 30X30

Celtic Grey naturale

mosaico 3d 5x30 30x30 cm

ROCK SALT CELTIC GREY MOS 3D LUC 30X30

Celtic Grey lucida

mosaico 3d 5x30 30x30 cm

ROCK SALT DANISH SMOKE MOS 3D NAT 30X30

Danish Smoke naturale

mosaico 3d 5x30 30x30 cm

ROCK SALT DANISH SMOKE MOS 3D LUC 30X30

Danish Smoke lucida

mosaico 3d 5x30 30x30 cm

ROCK SALT MAUI GREEN MOS 3D NAT 30X30

Maui Green naturale

mosaico 3d 5x30 30x30 cm

ROCK SALT MAUI GREEN MOS 3D LUC 30X30

Maui Green lucida

mosaico 3d 5x30 30x30 cm

ROCK SALT HAWAIIAN RED MOS 3D NAT 30X30

Hawaiian Red naturale

mosaico 3d 5x30 30x30 cm

ROCK SALT HAWAIIAN RED MOS 3D LUC 30X30

Hawaiian Red lucida

mosaico 3d 5x30 30x30 cm

Mosaico Magnum

ROCK SALT WH.GOLD NAT.6MM MOS 7,5x7,5

White Gold naturale

mosaico 7,5x7,5 30x30 cm

ROCK SALT WH.GOLD LUC 6MM MOS 7,5x7,5

White Gold lucida

mosaico 7,5x7,5 30x30 cm

ROCK SALT CE.GREY NAT.6MM MOS 7,5x7,5

Celtic Grey naturale

mosaico 7,5x7,5 30x30 cm

ROCK SALT CE.GREY LUC 6MM MOS 7,5x7,5

Celtic Grey lucida

mosaico 7,5x7,5 30x30 cm

ROCK SALT DA.SMOKE NAT.6MM MOS 7,5x7,5

Danish Smoke naturale

mosaico 7,5x7,5 30x30 cm

ROCK SALT DA.SMOKE LUC 6MM MOS 7,5x7,5

Danish Smoke lucida

mosaico 7,5x7,5 30x30 cm

ROCK SALT MAUI GREEN NAT.6MM MOS 7,5x7,5

Maui Green naturale

mosaico 7,5x7,5 30x30 cm

ROCK SALT MAUI GREEN LUC 6MM MOS 7,5x7,5

Maui Green lucida

mosaico 7,5x7,5 30x30 cm

ROCK SALT HAWA.RED NAT.6MM MOS 7,5x7,5

Hawaiian Red naturale

mosaico 7,5x7,5 30x30 cm

ROCK SALT HAWA.RED LUC 6MM MOS 7,5x7,5

Hawaiian Red lucida

mosaico 7,5x7,5 30x30 cm

Reference standard E.N. 14411 . Appendix G. Group BⅠa. GL
Test method
Reference value
Declared value
Download
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
HAWAIIAN RED - Cl. 3
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
Cl. 4
SHINY
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
Cl. 5
MATTE
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Glaze crazing resistence
ISO-10545-11
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
WHITE GOLD - Cl. 5
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
CELTIC GREY, DANISH SMOKE, MAUI GREEN - Cl. 4
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
HAWAIIAN RED - Cl. 3
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
GB minimo / GB minimum / GB minimum / GB mindestens / GB minimo
GA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLB
SHINY
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLA
MATTE
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
MATTE
Slip resistance with shoes
DIN-51130:2010
-
R10
MATTE
Barefoot slip resistance
DIN-51097
-
Cl. A+B
MATTE

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 14000 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2
Resistance to staining
ISO-10545-14
-
Cl. 4
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Slip resistance with shoes
DIN-51130:2010
-
R11
Barefoot slip resistance
DIN-51097
-
Cl. A+B
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
HAWAIIAN RED - Cl. 3
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
Cl. 4
SHINY
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Glaze crazing resistence
ISO-10545-11
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
WHITE GOLD - Cl. 5
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
CELTIC GREY, DANISH SMOKE, MAUI GREEN - Cl. 4
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
HAWAIIAN RED - Cl. 3
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
GB minimo / GB minimum / GB minimum / GB mindestens / GB minimo
GA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLB
SHINY
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLA
MATTE
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
MATTE
Slip resistance with shoes
DIN-51130:2010
-
R10
MATTE
Barefoot slip resistance
DIN-51097
-
Cl. A+B
MATTE

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 14000 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2
Resistance to staining
ISO-10545-14
-
Cl. 4
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Slip resistance with shoes
DIN-51130:2010
-
R11
Barefoot slip resistance
DIN-51097
-
Cl. A+B
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,2%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness < 7,5 mm)
ISO-10545-4
≥700 Newton
average value 1350 N *
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2 *
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
HAWAIIAN RED - Cl. 3
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
Cl. 4
SHINY
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
Cl. 4-5
MATTE
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Glaze crazing resistence
ISO-10545-11
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
WHITE GOLD - Cl. 5
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
CELTIC GREY, DANISH SMOKE, MAUI GREEN - Cl. 4
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
HAWAIIAN RED - Cl. 3
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
GB minimo / GB minimum / GB minimum / GB mindestens / GB minimo
GA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLB
SHINY
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLA
MATTE
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
MATTE
Slip resistance with shoes
DIN-51130:2010
-
R10
MATTE
Barefoot slip resistance
DIN-51097
-
Cl. A+B
MATTE

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

* Test performed on 80x80cm size

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 14000 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2
Resistance to staining
ISO-10545-14
-
Cl. 4
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Slip resistance with shoes
DIN-51130:2010
-
R11
Barefoot slip resistance
DIN-51097
-
Cl. A+B
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

If you want, we'll keep you updated on the latest news about products and events

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

Italiano Chiudi / Close