Artifact

The rustic value of Cerim revamped for a contemporary vibe

Artifact
Artifact of Cerim refers to the simplicity of spatulated cement crafted by skilled hands, whose uniqueness becomes a distinctive feature, an identifying factor that reveals the taste of those who select it for their daily lives.

Artifact of Cerim refers to the simplicity of spatulated cement crafted by skilled hands, whose uniqueness becomes a distinctive feature, an identifying factor that reveals the taste of those who select it for their daily lives.

 Its aesthetic impact, antiqued and imperfect, conveys an artlessness that harmonizes with the broad color selection, made up of neutral colors and enhanced by shade variations ranging from cooler to warmer tones. 

Artifact
Artifact
Artifact

 The collection is available in a thickness of 10 mm and offers two sizes (60x120 cm and 80x80 cm) with the relative modular sub-sizes (the 30x60 cm is also available in the grip outdoor finish). The graphic shade variations of the cement are declined in 6 different neutral shades ranging from white to coal through gray and beige.

Artifact
Artifact

Colors

Aged_White

Worn_Sand

Used_Grey

Crafted_Graphite

Vintage_Taupe

Worked_Charcoal

Sizes

80x80 cm 32"x32"

60x120 cm 24"x48"

60x60 cm 24"x24"

40x80 cm 16"x32"

30x60 cm 12"x24"

modulo listello sfalsato 21x40 cm Modulo Listello Sfalsato 6"x16"

mosaico 3x3 30x30 cm Mosaico 11/8"x11/8" 12"x12"

mosaico 3d 5x5 30x30 cm Mosaico 3d 2"x2" 12"x12"

Thickness

10,00 mm

Surfaces*

MATTE

GRIP

* To find out more about the meaning of each surface, read the glossary at the following link www.florim.com/en/surfaces/

Modulo Listello Sfalsato

ARTIFACT AGED_WHITE LIST SFAL 21X40

Aged_White naturale

modulo listello sfalsato 21x40 cm

ARTIFACT WORN_SAND LIST SFAL 21X40

Worn_Sand naturale

modulo listello sfalsato 21x40 cm

ARTIFACT USED_GREY LIST SFAL 21X40

Used_Grey naturale

modulo listello sfalsato 21x40 cm

ARTIFACT CRAFTED_GRAPHIT LIST SFAL 21X40

Crafted_Graphite naturale

modulo listello sfalsato 21x40 cm

ARTIFACT VINTAGE_TAUPE LIST SFAL 21X40

Vintage_Taupe naturale

modulo listello sfalsato 21x40 cm

ARTIFACT WORKED_CHARCOAL LIST SFAL 21X40

Worked_Charcoal naturale

modulo listello sfalsato 21x40 cm

Mosaico

ARTIFACT AGED_WHITE 30x30 MOS 3X3

Aged_White naturale

mosaico 3x3 30x30 cm

ARTIFACT WORN_SAND 30x30 MOS 3X3

Worn_Sand naturale

mosaico 3x3 30x30 cm

ARTIFACT USED_GREY 30x30 MOS 3X3

Used_Grey naturale

mosaico 3x3 30x30 cm

ARTIFACT CRAFTED_GRAPHITE 30x30 MOS 3X3

Crafted_Graphite naturale

mosaico 3x3 30x30 cm

ARTIFACT VINTAGE_TAUPE 30x30 MOS 3X3

Vintage_Taupe naturale

mosaico 3x3 30x30 cm

ARTIFACT WORKED_CHARCOAL 30x30 MOS 3X3

Worked_Charcoal naturale

mosaico 3x3 30x30 cm

Mosaico 3d

ARTIFACT AGED_WHITE MOS 3D 30X30

Aged_White naturale

mosaico 3d 5x5 30x30 cm

ARTIFACT WORN_SAND MOS 3D 30X30

Worn_Sand naturale

mosaico 3d 5x5 30x30 cm

ARTIFACT USED_GREY MOS 3D 30X30

Used_Grey naturale

mosaico 3d 5x5 30x30 cm

ARTIFACT CRAFTED_GRAPHITE MOS 3D 30X30

Crafted_Graphite naturale

mosaico 3d 5x5 30x30 cm

ARTIFACT VINTAGE_TAUPE MOS 3D 30X30

Vintage_Taupe naturale

mosaico 3d 5x5 30x30 cm

ARTIFACT WORKED_CHARCOAL MOS 3D 30X30

Worked_Charcoal naturale

mosaico 3d 5x5 30x30 cm

Reference standard E.N. 14411 . Appendix G. Group BⅠa. GL
Test method
Reference value
Declared value
Download
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
±5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
±0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
±0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
±0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
Cl. 2 (Worked Charcoal)
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
Cl. 4
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Glaze crazing resistence
ISO-10545-11
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
Cl. 4
GRIP
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
Cl. 4-5
MATTE
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLA
GRIP
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLA-GLB
MATTE
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
GB minimo / GB minimum / GB minimum / GB mindestens / GB minimo
GA
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
Slip resistance with shoes
DIN-51130:2010
-
R10
MATTE
Slip resistance with shoes
DIN-51130:2010
-
R12
GRIP
Barefoot slip resistance
DIN-51097
-
Cl. A+B
MATTE
Barefoot slip resistance
DIN-51097
-
Cl. A+B+C
GRIP

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

If you want, we'll keep you updated on the latest news about products and events

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

Italiano Chiudi / Close