"Materia" Project

Creative dialog of modern surfaces between craftsmanship and modernism

Wall decor with tiles: Materia Project | CASAMOOD
Materia Project is a project that combines multiple fine porcelain stoneware in colored glass and plaster mosaics in order to create new creative itineraries with a strong personality

Materia Project is a project that combines multiple fine porcelain stoneware in colored glass and plaster mosaics in order to create new creative itineraries with a strong personality

A simple and sophisticated project that allows itself to be coddled by the constant balance between art and design, between craftsmanship and modernism. An advanced project that never conditions you, but which always leaves you free to try, to change, to experiment with new solutions for a guaranteed harmonic result.

Wall decor with tiles: Materia Project | CASAMOOD
Wall decor with tiles: Materia Project | CASAMOOD
Wall decor with tiles: Materia Project | CASAMOOD

The space defined by Materia Project is pure, elegant and essential, enhanced by chromatic contrasts where the interaction of the various materials contributes to opening up its own way of being, beyond any style classification. Materia Project is ideal for large and bright places with soft and light colors where every detail is perfect, positioned just at the right point.

Wall decor with tiles: Materia Project | CASAMOOD
Wall decor with tiles: Materia Project | CASAMOOD
Wall decor with tiles: Materia Project | CASAMOOD

TECHNICAL NOTES

Each finish encounters a specific range of sizes, designed to emphasize the reference material inspiration. Glass and plaster mosaics are available to match all the available chromatic variations.  

Colors

01

02

03

04

05

06

07

08

Sizes

120x120 cm 48"x48"

120x240 cm 48"x95"

15x120 cm 6"x48"

160x160 cm 64"x64"

160x320 cm 64"x126"

20x120 cm 8"x48"

20x80 cm 8"x32"

40x180 cm 16"x71"

40x80 cm 16"x32"

60x120 cm 24"x48"

60x60 cm 24"x24"

80x180 cm 32"x71"

80x240 cm 32"x95"

80x80 cm 32"x32"

Modulo Listello Sfalsato

modulo listello sfalsato 21x40 cm Modulo Listello Sfalsato 81/4"x16"

Modulo Listello Sfalsato Glass

modulo listello sfalsato 22,5x25 cm 9"x10"

Modulo Listello Sfalsato Mix 3d

modulo listello sfalsato mix 3d 15x60 cm Modulo Listello Sfalsato Mix 3d 6"x24"

Modulo Muretto Sfalsato Magnum

modulo muretto sfalsato 30x30 cm Modulo Muretto Sfalsato 12"x12"

Mosaico

mosaico 5x5 30x30 cm Mosaico 2"x2" 12"x12"

Mosaico Magnum

mosaico 1,5x3 30x30 cm Mosaico 1/2x11/8" 12"x12"

mosaico 7,5x7,5 30x30 cm Mosaico 3"x3" 12"x12"

Thickness

10,00 mm

4,50 mm

6,00 mm

Surfaces

HONED

BRUSHED

CRUSTED

BARK

SHINY

HONED - BRUSHED

Colors:

Size:

Thickness:

Surface:

Decoro Decor

MATERIA PROJECT 01.DECOR 20X80

01. decor

20x80 cm

MATERIA PROJECT 02.DECOR 20X80

02. decor

20x80 cm

MATERIA PROJECT 03.DECOR 20X80

03. decor

20x80 cm

MATERIA PROJECT 04.DECOR 20X80

04. decor

20x80 cm

MATERIA PROJECT 05.DECOR 20X80

05. decor

20x80 cm

MATERIA PROJECT 06.DECOR 20X80

06. decor

20x80 cm

MATERIA PROJECT 07.DECOR 20X80

07. decor

20x80 cm

MATERIA PROJECT 08.DECOR 20X80

08. decor

20x80 cm

Decoro Magnum

MAGNUM DECORO CDCC

DECORO CDC

320x320 cm

MAGNUM DECORO CDCD/A

DECORO CDD A

80x80 cm

MAGNUM DECORO CDCD/B

DECORO CDD B

80x80 cm

MAGNUM DECORO CDCD/C

DECORO CDD C

80x80 cm

MAGNUM DECORO CDCD/D

DECORO CDD D

80x80 cm

MAGNUM DECORO CDCD/E

DECORO CDD E

80x80 cm

MAGNUM DECORO CDCD/F

DECORO CDD F

80x80 cm

MAGNUM DECORO CDCM

DECORO CDM

120x240 cm

MAGNUM DECORO CDCD A/B/C/D/E

DECORO CDD A/B/C/D/E

160x240 cm

Decoro Triangle

MATERIA PROJ.TRIAN.02BRUSH 03HONED 80X80

triangle 02 brushed/03 honed

80x80 cm

Modulo Listello Sfalsato

MATERIA PROJECT 01.HONED LIST.SFAL.21X40

01 honed

modulo listello sfalsato 21x40 cm

MATERIA PROJECT 02.HONED LIST.SFAL.21X40

02 honed

modulo listello sfalsato 21x40 cm

MATERIA PROJECT 03.HONED LIST.SFAL.21X40

03 honed

modulo listello sfalsato 21x40 cm

MATERIA PROJECT 04.HONED LIST.SFAL.21X40

04 honed

modulo listello sfalsato 21x40 cm

MATERIA PROJECT 05.HONED LIST.SFAL.21X40

05 honed

modulo listello sfalsato 21x40 cm

MATERIA PROJECT 06.HONED LIST.SFAL.21X40

06 honed

modulo listello sfalsato 21x40 cm

MATERIA PROJECT 07.HONED LIST.SFAL.21X40

07 honed

modulo listello sfalsato 21x40 cm

MATERIA PROJECT 08.HONED LIST.SFAL.21X40

08 honed

modulo listello sfalsato 21x40 cm

Modulo Listello Sfalsato Glass

MATERIA PROJECT GLASS 01 MOD.LIST.SFAL.

01 lucida

modulo listello sfalsato 22,5x25 cm

MATERIA PROJECT GLASS 02 MOD.LIST.SFAL.

02 lucida

modulo listello sfalsato 22,5x25 cm

MATERIA PROJECT GLASS 03 MOD.LIST.SFAL.

03 lucida

modulo listello sfalsato 22,5x25 cm

MATERIA PROJECT GLASS 04 MOD.LIST.SFAL.

04 lucida

modulo listello sfalsato 22,5x25 cm

MATERIA PROJECT GLASS 05 MOD.LIST.SFAL.

05 lucida

modulo listello sfalsato 22,5x25 cm

MATERIA PROJECT GLASS 06 MOD.LIST.SFAL.

06 lucida

modulo listello sfalsato 22,5x25 cm

MATERIA PROJECT GLASS 07 MOD.LIST.SFAL.

07 lucida

modulo listello sfalsato 22,5x25 cm

MATERIA PROJECT GLASS 08 MOD.LIST.SFAL.

08 lucida

modulo listello sfalsato 22,5x25 cm

Modulo Listello Sfalsato Mix 3d

MATERIA PROJECT 01.HONED/BRUSHED 15X60

01 honed---brushed

modulo listello sfalsato mix 3d 15x60 cm

MATERIA PROJECT 02.HONED/BRUSHED 15X60

02 honed---brushed

modulo listello sfalsato mix 3d 15x60 cm

MATERIA PROJECT 03.HONED/BRUSHED 15X60

03 honed---brushed

modulo listello sfalsato mix 3d 15x60 cm

MATERIA PROJECT 04.HONED/BRUSHED 15X60

04 honed---brushed

modulo listello sfalsato mix 3d 15x60 cm

MATERIA PROJECT 05.HONED/BRUSHED 15X60

05 honed---brushed

modulo listello sfalsato mix 3d 15x60 cm

MATERIA PROJECT 06.HONED/BRUSHED 15X60

06 honed---brushed

modulo listello sfalsato mix 3d 15x60 cm

MATERIA PROJECT 07.HONED/BRUSHED 15X60

07 honed---brushed

modulo listello sfalsato mix 3d 15x60 cm

MATERIA PROJECT 08.HONED/BRUSHED 15X60

07 honed---brushed

modulo listello sfalsato mix 3d 15x60 cm

Modulo Muretto Sfalsato Magnum

MATERIA PROJECT 01.HONED 7,5x15 MURETTO

01 honed

modulo muretto sfalsato 30x30 cm

MATERIA PROJECT 02.HONED 7,5x15 MURETTO

02 honed

modulo muretto sfalsato 30x30 cm

MATERIA PROJECT 05.HONED 7,5x15 MURETTO

05 honed

modulo muretto sfalsato 30x30 cm

Mosaico

MATERIA PROJECT 01.HONED MOSAICO 30X30

01 honed

mosaico 5x5 30x30 cm

MATERIA PROJECT 02.HONED MOSAICO 30X30

02 honed

mosaico 5x5 30x30 cm

MATERIA PROJECT 03.HONED MOSAICO 30X30

03 honed

mosaico 5x5 30x30 cm

MATERIA PROJECT 04.HONED MOSAICO 30X30

04 honed

mosaico 5x5 30x30 cm

MATERIA PROJECT 05.HONED MOSAICO 30X30

05 honed

mosaico 5x5 30x30 cm

MATERIA PROJECT 06.HONED MOSAICO 30X30

06 honed

mosaico 5x5 30x30 cm

MATERIA PROJECT 07.HONED MOSAICO 30X30

07 honed

mosaico 5x5 30x30 cm

MATERIA PROJECT 08.HONED MOSAICO 30X30

08 honed

mosaico 5x5 30x30 cm

Mosaico Magnum

MATERIA PROJECT 01.HONED 7,5x7,5 MOSAICO

01 honed

mosaico 7,5x7,5 30x30 cm

MATERIA PROJECT 02.HONED 7,5x7,5 MOSAICO

02 honed

mosaico 7,5x7,5 30x30 cm

MATERIA PROJECT 05.HONED 7,5x7,5 MOSAICO

05 honed

mosaico 7,5x7,5 30x30 cm

MATERIA PROJECT 01.HONED 1,5x3 MOSAICO

01 honed

mosaico 1,5x3 30x30 cm

MATERIA PROJECT 02.HONED 1,5x3 MOSAICO

02 honed

mosaico 1,5x3 30x30 cm

MATERIA PROJECT 05.HONED 1,5x3 MOSAICO

05 honed

mosaico 1,5x3 30x30 cm

Norma di riferimento e.n. 14411. appendice G. Gruppo bia. UGL
Test method
Reference value
Declared value
Download
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to staining
ISO-10545-14
-
Cl. 4
Slip resistance with shoes
DIN-51130:2010
-
R10
bark
Slip resistance with shoes
DIN-51130:2010
-
R10
brushed
Slip resistance with shoes
DIN-51130:2010
-
R10
crusted
Slip resistance with shoes
DIN-51130:2010
-
R9
honed
Barefoot slip resistance
DIN-51097
-
Cl. A+B
brushed
Barefoot slip resistance
DIN-51097
-
Cl. A + B
crusted
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
Static coefficient of friction
ASTM-C1028
>0,60 dry and wet
≥ 0,6% dry and wet
crusted
Static coefficient of friction
ASTM-C1028
>0,60 dry and wet
≥ 0,6% dry and wet
bark
Static coefficient of friction
ASTM-C1028
>0,60 dry and wet
≥ 0,6% dry and wet
brushed
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

They do not regard the trim pieces.

Resistance to high concentrations of acids and alkali
ISO-10545-13
-
UHA - GHA
Resistance to low concentrations of acids and alkali
ISO-10545-13
-
ULA - GLA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
-
UA - GA
Resistance to staining
ISO-10545-14
-
CLASSE 5 / CLASSE 5 / CLASS 5 / GRUPPE 5 / CLASE 5
Barefoot slip resistance
DIN-51097
-
CLASSE B / CLASSE B / CLASS B / GRUPPE B / CLASE B
Amount of water absorbed, in percentage
ISO-10545-3
-
< 0,5%
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
-
< 300 mm3
Resistance to abrasion of glazed tiles
ISO-10545-7
-
CLASSE 4 / CLASSE 4 / CLASS 4 / GRUPPE 4 / CLASE 4
Coefficient of thermal linear expansion
ISO-10545-8
-
< 7.5

Notes

Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Slip resistance with shoes
DIN-51130:2010
-
R9
honed
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

They do not regard the trim pieces.

Resistance to high concentrations of acids and alkali
ISO-10545-13
-
UHA - GHA
Resistance to low concentrations of acids and alkali
ISO-10545-13
-
ULA - GLA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
-
UA - GA
Resistance to staining
ISO-10545-14
-
CLASSE 5 / CLASSE 5 / CLASS 5 / GRUPPE 5 / CLASE 5
Barefoot slip resistance
DIN-51097
-
CLASSE B / CLASSE B / CLASS B / GRUPPE B / CLASE B
Amount of water absorbed, in percentage
ISO-10545-3
-
< 0,5%
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
-
< 300 mm3
Resistance to abrasion of glazed tiles
ISO-10545-7
-
CLASSE 4 / CLASSE 4 / CLASS 4 / GRUPPE 4 / CLASE 4
Coefficient of thermal linear expansion
ISO-10545-8
-
< 7.5

Notes

Breaking strength in N (thickness < 7,5 mm)
ISO-10545-4
≥700 Newton
average value 1350 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to staining
ISO-10545-14
-
Cl. 3
Slip resistance with shoes
DIN-51130:2010
-
R9
honed
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,2%
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
Determinazione della cessione di piombo e cadmio
ISO-10545-15
-
ASSENTE / ABSENT / ABSENT/ ABWESEND / AUSENTE / несуществующее

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

They do not regard the trim pieces.

Resistance to high concentrations of acids and alkali
ISO-10545-13
-
UHA - GHA
Resistance to low concentrations of acids and alkali
ISO-10545-13
-
ULA - GLA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
-
UA - GA
Resistance to staining
ISO-10545-14
-
CLASSE 5 / CLASSE 5 / CLASS 5 / GRUPPE 5 / CLASE 5
Barefoot slip resistance
DIN-51097
-
CLASSE B / CLASSE B / CLASS B / GRUPPE B / CLASE B
Amount of water absorbed, in percentage
ISO-10545-3
-
< 0,5%
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
-
< 300 mm3
Resistance to abrasion of glazed tiles
ISO-10545-7
-
CLASSE 4 / CLASSE 4 / CLASS 4 / GRUPPE 4 / CLASE 4
Coefficient of thermal linear expansion
ISO-10545-8
-
< 7.5

Notes

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

Subscribe to the Florim newsletter

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

vai all'italiano Chiudi / Close