Icon Outdoor

Continuity between interior and exterior environments to combine aesthetics and versatility

Self-laying wood effect floor tiles for outside floors: Icon Outdoor
Icon Outdoor is the self-supporting solution in fine porcelain stoneware to create continuity between interior and exterior environments

Icon Outdoor is the self-supporting solution in fine porcelain stoneware to create continuity between interior and exterior environments

At the service of private and public applications, this collection in oversized 2 cm thickness allows aesthetics, performance, versatility, easy installation and environmental friendliness to be combined.

Self-laying wood effect floor tiles for outside floors: Icon Outdoor
Self-laying wood effect floor tiles for outside floors: Icon Outdoor
Self-laying wood effect floor tiles for outside floors: Icon Outdoor

A new way to floor exterior spaces with style, both in private settings and in high foot traffic situations.

Self-laying wood effect floor tiles for outside floors: Icon Outdoor
Self-laying wood effect floor tiles for outside floors: Icon Outdoor
Self-laying wood effect floor tiles for outside floors: Icon Outdoor

TECHNICAL NOTES

Made up of recycled material at a percentage of more than 70%, icon outdoor is Bureau Veritas certified in accordance with international standard ISO 14021. Icon Outdoor is ideal for terraces, gazebos, gardens, patios, pools and relaxation areas, as well as for applications without joints on grass, gravel, concrete floor slab and also on fixed or adjustable feet.

Reference standard E.N. 14411 . Appendix G. Group BⅠa. UGL
Test method
Reference value
Declared value
Download
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 14000 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to staining
ISO-10545-14
-
4
Barefoot slip resistance
DIN-51097
-
Cl. C
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
Static coefficient of friction
ASTM-C1028
>0,60 dry and wet
> 0,60 dry and wet
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Slip resistance with shoes
DIN-51130:2010
-
R11

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

Subscribe to the Florim newsletter

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

Italiano Chiudi / Close