Onyx&More

From the union of onyx and porphyry, a secret tale that brings with it all the allure of nature  

Chromatic blends and harmonious contrasts that only nature can bestow

Chromatic blends and harmonious contrasts that only nature can bestow

In Onyx&More of Casa dolce casa, the harmonious equilibrium between elegance and creativity reveals itself in the original and extraordinary combination of two very different stones which brings refined, welcoming and intimate spaces into being.

Onyx&More - Onyx Effect Porcelain Tiles | Florim Ceramiche S.p.A.
Onyx&More - Onyx Effect Porcelain Tiles | Florim Ceramiche S.p.A.
Onyx&More - Onyx Effect Porcelain Tiles | Florim Ceramiche S.p.A.

Onyx&More explores the unexpected elegance of onyx: refined, luminous, and poetic, naturally embellished with porphyry, an unobtrusive and informal stone material. From nature, mysterious and unpredictable, is born a collection surging with expression that plays with the harmonious contrasts and the chromatic blend that only nature can create.  

Discover all the new collections

Onyx&More - Onyx Effect Porcelain Tiles | Florim Ceramiche S.p.A.
Onyx&More - Onyx Effect Porcelain Tiles | Florim Ceramiche S.p.A.
Onyx&More - Onyx Effect Porcelain Tiles | Florim Ceramiche S.p.A.

TECHNICAL NOTES

The aesthetic variations inspired mainly by onyx (White Onyx, Golden Onyx, Silver Onyx, White blend, Golden blend, Silver blend) are available in matte and glossy finishes; the aesthetic variations inspired mainly by porphyry (White porphyry, Golden porphyry and Silver porphyry) are made in a structured finish to enhance the natural character of these two different stone materials: the first, refined, the second, tactile.

Colors

White

White Onyx

White Blend

White Porphyry

Golden

Golden Onyx

Golden Blend

Golden Porphyry

Silver

Silver Onyx

Silver Blend

Silver Porphyry

Sizes

160x160 cm 63"x63"

160x320 cm 63"x126"

120x120 cm 48"x48"

120x240 cm 48"x95"

120x280 cm 48"x111"

80x180 cm 32"x71"

80x80 cm 32"x32"

60x120 cm 24"x48"

60x60 cm 24"x24"

40x80 cm 16"x32"

Thickness

10,00 mm

6,00 mm

Surfaces*

SATIN

GLOSSY

SLATE-HAMMERED

* To find out more about the meaning of each surface, please consult the glossary at www.florim.com/en/surfaces



Due to the different production technologies, combining products of different thicknesses contiguously can present a lack of uniformity and is therefore not recommended. 

Colors:

Size:

Thickness:

Surface:

Reference standard E.N. 14411 . Appendix G. Group BⅠa. UGL
Test method
Reference value
Declared value
Download
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA-ULB
GLOSSY
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
SLATE-HAMMERED
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULB
SATIN
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
SLATE-HAMMERED
Slip resistance with shoes
DIN-51130:2010
-
R10
SLATE-HAMMERED
Barefoot slip resistance
DIN-51097
-
Cl. B
SLATE-HAMMERED
Resistance to staining
ISO-10545-14
-
Cl. 4-5
GLOSSY
Resistance to staining
ISO-10545-14
-
Cl. 5
SLATE-HAMMERED
Resistance to staining
ISO-10545-14
-
Cl. 4-5
SATIN

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness < 7,5 mm)
ISO-10545-4
≥700 Newton
average value 1350 N *
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2 *
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA-ULB
GLOSSY
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
SLATE-HAMMERED
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA-ULB
SATIN
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
SLATE-HAMMERED
Slip resistance with shoes
DIN-51130:2010
-
R10
SLATE-HAMMERED
Barefoot slip resistance
DIN-51097
-
Cl. B
SLATE-HAMMERED
Resistance to staining
ISO-10545-14
-
Cl. 4-5
GLOSSY
Resistance to staining
ISO-10545-14
-
Cl. 5
SLATE-HAMMERED
Resistance to staining
ISO-10545-14
-
Cl. 4-5
SATIN
Release of hazardous substances
DM-1-2-2007-Reg-CE-1935-2004
Valore dichiarato per superfici gl con impieghi su piani di lavoro / Declared value for gl surfaces used on worktops / valeur déclarée Pour surfaces gl utilisées sur plans de travail /angegebener wert für Gl oberflächen zum gebrauch als arbeitsplatten / valor declarado Para acabados gl utilizados para superficies de trabajo / заявленное Значение для глазурованных поверхностей, с использованием на рабочих столах
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

* Test performed on 80x80cm size

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

If you want, we'll keep you updated on the latest news about products and events

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

Italiano Chiudi / Close