Stones & More 2.0

Stones and marble for a voyage through refined suggestions in perfect chromatic balance

Marbles and stones made of ceramic porcelain tiles: Stones & More


A refined selection of stone and marble breathes life into a new container

A refined selection of stone and marble breathes life into a new container

The narration of an imaginary voyage through the suggestions of different locations to embody eight inspirational sources with perfect chromatic balance. Stones&More evolves into Stones&More 2.0 to tell a story of renewed grace through fine porcelain stoneware surfaces with profoundly different graphic versions where the common thread is the same philosophy of elegance. 

Marbles and stones made of ceramic porcelain tiles: Stones & More
Marbles and stones made of ceramic porcelain tiles: Stones & More
Marbles and stones made of ceramic porcelain tiles: Stones & More

A harmonious sobriety in line with the Casa dolce casa philosophy accompanies the gaze on the discrete and perfect architecture to breathe life into environments permeated with the balanced synthesis of crafting skill and industrial capacity. The play on the contrasts between tradition and modernism creates an atmosphere suspended between memory and future. The structure and full body of the finishes enhance the space with popular details. The eclectic and refined spirit of Stones&More 2.0 is expressed through the harmony of elegant material suggestions, smooth and reflective surfaces, to meet both the visual and tactile needs. Stones&More 2.0 also narrates its refined naturalness in the Florim Magnum Oversize project, where the large size surfaces are an invitation to enter and share the emotion of an even more enchanting dimension.

Marbles and stones made of ceramic porcelain tiles: Stones & More
Marbles and stones made of ceramic porcelain tiles: Stones & More
Marbles and stones made of ceramic porcelain tiles: Stones & More

TECHNICAL NOTES

Stones&More 2.0 is recommended for floor and wall applications in residential settings, but also for medium-high traffic applications. Thanks to the available innovative technologies, the development of the available sizes and finishes is offered for each surface available in the catalogue, favouring a wide range of solutions.

Colors

Stone Calacatta

Stone Marfil

Stone Zecevo

Stone Burl White

Stone Burl Gray

Stone Sahara Noir

Arabescato White

Stone Calacatta Black

Amani Bronze

Sizes

120x120 cm 48"x48"

120x240 cm 48"x95"

120x280 cm 48"x111"

160x160 cm 64"x64"

160x320 cm 64"x126"

30x60 cm 12"x24"

40x80 cm 16"x32"

60x120 cm 24"x48"

60x240 cm 24"x95"

60x60 cm 24"x24"

80x180 cm 32"x71"

80x240 cm 32"x95"

80x80 cm 32"x32"

Modulo Listello Sfalsato

modulo listello sfalsato 30x60 cm Modulo Listello Sfalsato 12"x24"

Modulo Listello Sfalsato 3d

modulo listello sfalsato 3d 15x60 cm Modulo Listello Sfalsato 3d 6"x24"

Modulo Muretto Sfalsato Magnum

modulo muretto sfalsato 30x30 cm Modulo Muretto Sfalsato 12"x12"

modulo muretto sfalsato 7,5x15 30x30 cm Modulo Muretto Sfalsato 3"x6" 12"x12"

Mosaico

mosaico 5x5 30x30 cm Mosaico 2"x2" 12"x12"

Mosaico Magnum

mosaico 7,5x7,5 30x30 cm Mosaico 3"x3" 12"x12"

mosaico 7,5x7,5 30x30 cm Mosaico 3"x3" 12"x12"

Thickness

10,00 mm

6,00 mm

Surfaces

SMOOTH

SHINY

MATTE

GRIP

GLOSSY

Colors:

Size:

Thickness:

Surface:

Decoro Magnum

MAGNUM DECORO CDCA

DECORO CDA

120x240 cm

MAGNUM DECORO CDCC

DECORO CDC

320x320 cm

MAGNUM DECORO CDCD/A

DECORO CDD A

80x80 cm

MAGNUM DECORO CDCD/B

DECORO CDD B

80x80 cm

MAGNUM DECORO CDCD/C

DECORO CDD C

80x80 cm

MAGNUM DECORO CDCD/D

DECORO CDD D

80x80 cm

MAGNUM DECORO CDCD/E

DECORO CDD E

80x80 cm

MAGNUM DECORO CDCD/F

DECORO CDD F

80x80 cm

MAGNUM DECORO CDCE/A

DECORO CDE A

60x120 cm

MAGNUM DECORO CDCE/B

DECORO CDE B

60x120 cm

MAGNUM DECORO CDCE/C

DECORO CDE C

60x120 cm

MAGNUM DECORO CDCG

DECORO CDG

120x240 cm

MAGNUM DECORO CDCI

DECORO CDI

120x240 cm

MAGNUM DECORO CDCL

DECORO CDL

120x240 cm

MAGNUM DECORO CDCN

DECORO CDN

120x240 cm

MAGNUM DECORO CDCP

DECORO CDP

120x240 cm

MAGNUM DECORO CDCD A/B/C/D/E

DECORO CDD A/B/C/D/E

160x240 cm

MAGNUM DECORO CDCE A/B/C

DECORO CDE A/B/C

240x240 cm

Modulo Listello Sfalsato

STONE CALACATTA LI.SF.30X60 NAT.

Stone Calacatta smooth

modulo listello sfalsato 30x60 cm

STONE MARFIL LI.SF.30X60 NAT.

Stone Marfil smooth

modulo listello sfalsato 30x60 cm

STONE ZECEVO LI.SF.30X60 NAT.

Stone Zecevo matte

modulo listello sfalsato 30x60 cm

STONE BURL WHITE LI.SF.30X60 NAT.

Stone Burl White matte

modulo listello sfalsato 30x60 cm

STONE BURL GRAY LI.SF.30X60 NAT

Stone Burl Gray matte

modulo listello sfalsato 30x60 cm

Modulo Listello Sfalsato 3d

STONE CALACATTA LI.SF.3D 15X60 NA

Stone Calacatta smooth

modulo listello sfalsato 3d 15x60 cm

STONE ZECEVO LI.SF.3D 15X60 NA

Stone Zecevo matte

modulo listello sfalsato 3d 15x60 cm

Modulo Muretto Sfalsato Magnum

STONE MARFIL SMOOTH 6MM MURETTO 7,5X15

Stone Marfil smooth

modulo muretto sfalsato 7,5x15 30x30 cm

STONE CALACATTA SMOOTH 6MM MURETTO7,5X15

Stone Calacatta smooth

modulo muretto sfalsato 7,5x15 30x30 cm

STONE BURL WHITE 7,5x15 MURETTO NAT.

Stone Burl White matte

modulo muretto sfalsato 30x30 cm

STONE BURL WHITE 7,5x15 MURETTO GLOSSY

Stone Burl White glossy

modulo muretto sfalsato 30x30 cm

STONE BURL GRAY 7,5x15 MURETTO NAT.

Stone Burl Gray matte

modulo muretto sfalsato 30x30 cm

STONE BURL GRAY 7,5x15 MURETTO GLOSSY

Stone Burl Gray glossy

modulo muretto sfalsato 30x30 cm

Mosaico

STONE ZECEVO MOSAICO 5X5 NAT.

Stone Zecevo matte

mosaico 5x5 30x30 cm

STONE BURL WHITE MOSAICO 5X5 NAT.

Stone Burl White matte

mosaico 5x5 30x30 cm

STONE BURL GRIGA MOSAICO 5X5 NAT.

Stone Burl Gray matte

mosaico 5x5 30x30 cm

Mosaico Magnum

STONE MARFIL SMOOTH 6MM MOS.7,5X7,5

Stone Marfil smooth

mosaico 7,5x7,5 30x30 cm

STONE CALACATTA SMOOTH 6MM MOS.7,5X7,5

Stone Calacatta smooth

mosaico 7,5x7,5 30x30 cm

STONE BURL WHITE 7,5x7,5 MOSAICO NAT.

Stone Burl White matte

mosaico 7,5x7,5 30x30 cm

STONE BURL WHITE 7,5x7,5 MOSAICO GLOSSY

Stone Burl White glossy

mosaico 7,5x7,5 30x30 cm

STONE BURL GRAY 7,5x7,5 MOSAICO NAT.

Stone Burl Gray matte

mosaico 7,5x7,5 30x30 cm

STONE BURL GRAY 7,5x7,5 MOSAICO GLOSSY

Stone Burl Gray glossy

mosaico 7,5x7,5 30x30 cm

Norma di riferimento e.n. 14411. appendice G. Gruppo bia. UGL
Test method
Reference value
Declared value
Download
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
±5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
±0,1%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
±0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
±0,2%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
grip
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
naturale
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
smooth
Resistance to staining
ISO-10545-14
-
Cl. 3-4
Slip resistance with shoes
DIN-51130:2010
-
R9 (zecevo, pece); R10 (burlington, brandy)
naturale
Slip resistance with shoes
DIN-51130:2010
-
R9
smooth
Slip resistance with shoes
DIN-51130:2010
-
R11
grip
Static coefficient of friction
ASTM-C1028
>0,60 dry and wet
> 0,6 dry and wet (burlington, brandy)
naturale
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
naturale
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42
grip
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
>0,42 wet
smooth
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Barefoot slip resistance
DIN-51097
-
Cl. B
grip
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHB
smooth
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
grip
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA-UHB
naturale
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULB
smooth
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
grip
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA-ULB
naturale
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
±5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
±0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
±0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
±0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
>3
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
Cl. 4
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Glaze crazing resistence
ISO-10545-11
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
GB minimo / GB minimum / GB minimum / GB mindestens / GB minimo
GA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLB

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
±5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
±0,1%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
±0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
±0,2%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
grip
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
naturale
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
smooth
Resistance to staining
ISO-10545-14
-
Cl. 3-4
Slip resistance with shoes
DIN-51130:2010
-
R9 (zecevo, pece); R10 (burlington, brandy)
naturale
Slip resistance with shoes
DIN-51130:2010
-
R9
smooth
Slip resistance with shoes
DIN-51130:2010
-
R11
grip
Static coefficient of friction
ASTM-C1028
>0,60 dry and wet
> 0,6 dry and wet (burlington, brandy)
naturale
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
naturale
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42
grip
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
>0,42 wet
smooth
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Barefoot slip resistance
DIN-51097
-
Cl. B
grip
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHB
smooth
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
grip
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA-UHB
naturale
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULB
smooth
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
grip
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA-ULB
naturale
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
±5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
±0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
±0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
±0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
>3
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
Cl. 4
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Glaze crazing resistence
ISO-10545-11
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
GB minimo / GB minimum / GB minimum / GB mindestens / GB minimo
GA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLB

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

Subscribe to the Florim newsletter

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

vai all'italiano Chiudi / Close