Rêves de Rex

The dream of contemporary elegance comes true

A contemporary, luxurious but balanced lifestyle

A contemporary, luxurious but balanced lifestyle

Inspired by the ancient and refined beauty of alabaster, the Rêves de Rex collection transforms the dream of contemporary elegance into reality through delicate nuances and precious colours that are perfectly in step with the most contemporary luxury living trends. From opulence and ostentation, the luxury world evolves towards more understated and balanced decorations notable for their minimalism.

Luxury Porcelain Floor Tiles - Rêves de Rex | Rex Porcelain Tiles | Florim
Luxury Porcelain Floor Tiles - Rêves de Rex | Rex Porcelain Tiles | Florim
Luxury Porcelain Floor Tiles - Rêves de Rex | Rex Porcelain Tiles | Florim

Soft vein patterns and gentle colour contrasts characterise a collection that exudes taste and authenticity, the bright and showy shades of yesterday consigned to memory. Surfaces with luminous, deep and delicate shades restore a sense of preciousness to the space without overpowering the architecture. The collection lends itself to various stylistic interpretations: the warm colours with matte finishes create natural and relaxing atmospheres, the pearl and blue tones emit light and uniqueness, revealing an infinite potential that is waiting to be explored.

Luxury Porcelain Floor Tiles - Rêves de Rex | Rex Porcelain Tiles | Florim
Luxury Porcelain Floor Tiles - Rêves de Rex | Rex Porcelain Tiles | Florim
Luxury Porcelain Floor Tiles - Rêves de Rex | Rex Porcelain Tiles | Florim

Colors

Rêve Perle

Rêve Noisette

Rêve Choco

Rêve Bleu

Sizes

160x320 cm 63"x126"

120x120 cm 48"x48"

120x240 cm 48"x95"

120x280 cm 48"x111"

80x180 cm 32"x71"

60x60 cm 24"x24"

60x120 cm 24"x48"

30x60 cm 12"x24"

Thickness

10,00 mm

6,00 mm

Surfaces*

MATTE

GLOSSY

* To find out more about the meaning of each surface, read the glossary at the following link www.florim.com/en/surfaces/



Due to the different production technologies, contiguous installation of products with different thickness may give a non-homogeneous result. For this reason we do not recommend this option. 

Colors:

Size:

Thickness:

Surface:

Reference standard E.N. 14411-ISO 13006 . Appendix G. Group BⅠa. GL
Test method
Reference value
Declared value
Download
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±1 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±0,8 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±1,5 mm)
± 0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
Squadrato ISO 13006 - ±0,4% (±1,8 mm)
± 0,35%
Amount of water absorbed, in percentage
ISO-10545-3
E≤0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
Cl. 5
MATTE
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
Cl. 4
GLOSSY
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLA
MATTE
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLB
GLOSSY
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
GB minimo / GB minimum / GB minimum / GB mindestens / GB minimo
GA
Glaze crazing resistence
ISO-10545-11
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
MATTE
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
Cl. 3 CHOCO
MATTE
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
Cl. 2 CHOCO
GLOSSY
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
Cl. 4 NOISETTE
MATTE - GLOSSY
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
Cl. 4 PERLE
MATTE - GLOSSY
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
Cl. 4 BLEU
MATTE - GLOSSY

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±1 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±0,8 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±1,5 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
Squadrato ISO 13006 - ±0,4% (±1,8 mm)
± 0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E≤0,5%
average value 0,08%
Breaking strength in N (thickness < 7,5 mm)
ISO-10545-4
≥700 Newton
average value 1350 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
Cl. 5
MATTE
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
Cl. 4
GLOSSY
Release of hazardous substances
DM-1-2-2007-Reg-CE-1935-2004
Valore dichiarato per superfici gl con impieghi su piani di lavoro / Declared value for gl surfaces used on worktops / valeur déclarée Pour surfaces gl utilisées sur plans de travail /angegebener wert für Gl oberflächen zum gebrauch als arbeitsplatten / valor declarado Para acabados gl utilizados para superficies de trabajo / заявленное Значение для глазурованных поверхностей, с использованием на рабочих столах
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
GB minimo / GB minimum / GB minimum / GB mindestens / GB minimo
GA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLA
MATTE
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLB
GLOSSY
Glaze crazing resistence
ISO-10545-11
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
MATTE
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
Cl. 3 CHOCO
MATTE
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
Cl. 2 CHOCO
GLOSSY
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
Cl. 4 NOISETTE
MATTE - GLOSSY
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
Cl. 4 PERLE
MATTE - GLOSSY
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
Cl. 4 BLEU
MATTE - GLOSSY

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

If you want, we'll keep you updated on the latest news about products and events

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

Italiano Chiudi / Close