Ardoise

The true essence of hewn stone, by Rex.

Ardoise - Slate Look Tiles | Rex | Florim Ceramiche
A timeless material whose authenticity, sensual and elegant, is implemented in modern environments, where precious and recovered elements coexist in perfect harmony.

A timeless material whose authenticity, sensual and elegant, is implemented in modern environments, where precious and recovered elements coexist in perfect harmony.

Full, uneven, alive. The collection is reminiscent of hewn slate, a typical stone of Northern Europe but also rather common in Central Europe, particularly in France and Belgium.

Ardoise - Slate Look Tiles | Rex | Florim Ceramiche
Ardoise - Slate Look Tiles | Rex | Florim Ceramiche
Ardoise - Slate Look Tiles | Rex | Florim Ceramiche

A precise chromatic choice selected 6 neutral and modern shades that cater to the vivid texture, the absolute protagonist of the collection. The delicacy of the colors chosen give the space a strong sense of light that contrasts with the hardness of the stone. The experience of Rex manages to join three dimensional texture and graphic movements in a play of optical effects to make a timeless material modern, giving it new life.

Ardoise - Slate Look Tiles | Rex | Florim Ceramiche
Ardoise - Slate Look Tiles | Rex | Florim Ceramiche
Ardoise - Slate Look Tiles | Rex | Florim Ceramiche

TECHNICAL NOTES

Its finish, matt or grip, allows application not only in traditional environments, but also in wellness centers and outdoor spaces in order to give the designer the chance to create a sense of textural continuity between the interior and exterior. The collection is part of the Florim Magnum Oversize project for floor and wall application, as well as furnishing complements.

Colors

Ivoire

Gris

Plomb

Blanc

Ecrù

Noir

Sizes

80x80 cm 32"x32"

60x120 cm 24"x48"

40x80 cm 16"x32"

30,4x60,8 cm 12"x24"

120x240 cm 48"x95"

120x120 cm 48"x48"

20x80 cm 8"x32"

modulo listello sfalsato 21x40 cm Modulo Listello Sfalsato 81/4"x16"

modulo muretto 3d 30x30 cm Modulo Muretto 3d 12"x12"

modulo muretto sfalsato 7,5x15 30x30 cm Modulo Muretto Sfalsato 3"x6" 12"x12"

mosaico 5x5 30x30 cm Mosaico 2"x2" 12"x12"

mosaico 1,5x3 30x30 cm Mosaico 1/2x11/8" 12"x12"

mosaico 7,5x7,5 30x30 cm Mosaico 3"x3" 12"x12"

Thickness

10,00 mm

6,00 mm

Surfaces*

MATTE

GRIP

* To find out more about the meaning of each surface, read the glossary at the following link www.florim.com/en/surfaces/

Due to the different production technologies, contiguous installation of products with different thickness may give a non-homogeneous result. For this reason we do not recommend this option. 

Colors:

Size:

Thickness:

Surface:

Decoro Magnum

MAGNUM DECORO REXE/A

DECORO REXE A

60x120 cm

MAGNUM DECORO REXE/B

DECORO REXE B

60x120 cm

MAGNUM DECORO REXE/C

DECORO REXE C

60x120 cm

MAGNUM DECORO REXD/H

DECORO REXH

120x240 cm

MAGNUM DECORO REXE A/B/C

DECORO REXE A/B/C

240x240 cm

Notes

Examples of decor customizations.
For each decor you can select Magnum materials and surfaces combining them in the way you prefer.
The decoration can be adapted to any requested measurements.

Modulo Listello Sfalsato

ARDOISE BLANC MOD.LIST.SFALSATO 21X40

Blanc matte

modulo listello sfalsato 21x40 cm

ARDOISE IVOIRE MOD.LIST.SFALSATO 21X40

Ivoire matte

modulo listello sfalsato 21x40 cm

ARDOISE ECRU MOD.LIST.SFALSATO 21X40

Ecrù matte

modulo listello sfalsato 21x40 cm

ARDOISE PLOMBE MOD.LIST.SFALSATO 21X40

Gris matte

modulo listello sfalsato 21x40 cm

ARDOISE GRIS MOD.LIST.SFALSATO 21X40

Plomb matte

modulo listello sfalsato 21x40 cm

ARDOISE NOIR MOD.LIST.SFALSATO 21X40

Noir matte

modulo listello sfalsato 21x40 cm

Modulo Muretto 3d

ARDOISE BLANC MOD.MURETTO 3D 30X30

Blanc matte

modulo muretto 3d 30x30 cm

ARDOISE IVOIRE MOD.MURETTO 3D 30X30

Ivoire matte

modulo muretto 3d 30x30 cm

ARDOISE ECRU MOD.MURETTO 3D 30X30

Ecrù matte

modulo muretto 3d 30x30 cm

ARDOISE PLOMBE MOD.MURETTO 3D 30X30

Gris matte

modulo muretto 3d 30x30 cm

ARDOISE GRIS MOD.MURETTO 3D 30X30

Plomb matte

modulo muretto 3d 30x30 cm

ARDOISE NOIR MOD.MURETTO 3D 30X30

Noir matte

modulo muretto 3d 30x30 cm

Modulo Muretto Sfalsato Magnum

ARDOISE BLANC 7,5x15 MURETTO

Blanc matte

modulo muretto sfalsato 7,5x15 30x30 cm

ARDOISE ECRU 7,5x15 MURETTO

Ecrù matte

modulo muretto sfalsato 7,5x15 30x30 cm

ARDOISE GRIS 7,5x15 MURETTO

Gris matte

modulo muretto sfalsato 7,5x15 30x30 cm

ARDOISE NOIR 7,5x15 MURETTO

Noir matte

modulo muretto sfalsato 7,5x15 30x30 cm

Mosaico

ARDOISE BLANC GRIP MOSAICO 5X5

Blanc grip

mosaico 5x5 30x30 cm

ARDOISE IVOIRE GRIIP MOSAICO 5X5

Ivoire grip

mosaico 5x5 30x30 cm

ARDOISE ECRU GRIP MOSAICO 5X5

Ecrù grip

mosaico 5x5 30x30 cm

ARDOISE PLOMBE GRIP MOSAICO 5X5

Gris grip

mosaico 5x5 30x30 cm

ARDOISE GRIS GRIP MOSAICO 5X5

Plomb grip

mosaico 5x5 30x30 cm

ARDOISE NOIR GRIP MOSAICO 5X5

Noir grip

mosaico 5x5 30x30 cm

Mosaico Magnum

ARDOISE BLANC 7,5x7,5 MOSAICO

Blanc matte

mosaico 7,5x7,5 30x30 cm

ARDOISE ECRU 7,5x7,5 MOSAICO

Ecrù matte

mosaico 7,5x7,5 30x30 cm

ARDOISE GRIS 7,5x7,5 MOSAICO

Gris matte

mosaico 7,5x7,5 30x30 cm

ARDOISE NOIR 7,5x7,5 MOSAICO

Noir matte

mosaico 7,5x7,5 30x30 cm

ARDOISE BLANC 1,5x3 MOSAICO 30X30

Blanc matte

mosaico 1,5x3 30x30 cm

ARDOISE ECRU 1,5x3 MOSAICO 30X30

Ecrù matte

mosaico 1,5x3 30x30 cm

ARDOISE GRIS 1,5x3 MOSAICO 30X30

Gris matte

mosaico 1,5x3 30x30 cm

ARDOISE NOIR 1,5x3 MOSAICO 30X30

Noir matte

mosaico 1,5x3 30x30 cm

Featured Projects

Projects with the collection

Reference standard E.N. 14411 . Appendix G. Group BⅠa. UGL
Test method
Reference value
Declared value
Download
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 n/mm2
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to staining
ISO-10545-14
-
Cl. 4
Slip resistance with shoes
DIN-51130:2010
-
R10
MATTE
Slip resistance with shoes
DIN-51130:2010
-
R11
GRIP
Barefoot slip resistance
DIN-51097
-
classe B
GRIP
Static coefficient of friction
ASTM-C1028
>0,60 dry and wet
> 0,6 dry and wet
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,2%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness < 7,5 mm)
ISO-10545-4
≥700 Newton
average value 1350 N *
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2 *
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
Resistance to staining
ISO-10545-14
-
Cl. 4
Slip resistance with shoes
DIN-51130:2010
-
R9
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
Release of hazardous substances
DM-1-2-2007-Reg-CE-1935-2004
Valore dichiarato per superfici gl con impieghi su piani di lavoro / Declared value for gl surfaces used on worktops / valeur déclarée Pour surfaces gl utilisées sur plans de travail /angegebener wert für Gl oberflächen zum gebrauch als arbeitsplatten / valor declarado Para acabados gl utilizados para superficies de trabajo / заявленное Значение для глазурованных поверхностей, с использованием на рабочих столах
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

* Test performed on 80x80cm size

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

If you want, we'll keep you updated on the latest news about products and events

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

Italiano Chiudi / Close