Geotech - Basalt Porcelain Tiles | Floor Gres | Florim Ceramiche S.p.A.
The hand of nature at the service of design

The hand of nature at the service of design

Geotech is the result of a blend between the aesthetic characteristics of the Madeira basalt and original and fresh chromatic research. Produced in fine porcelain stoneware, this collection is available in the colors and finishes that best express its vast design potential for floors, walls and ventilated façades.

Geotech - Basalt Porcelain Tiles | Floor Gres | Florim Ceramiche S.p.A.
Geotech - Basalt Porcelain Tiles | Floor Gres | Florim Ceramiche S.p.A.
Geotech - Basalt Porcelain Tiles | Floor Gres | Florim Ceramiche S.p.A.

The canneté version is entirely original, characterized by an incision made up of parallel lines that run along the entire surface of the slab that reinterpret the typical trimming done on wood slats for exteriors.

Geotech - Basalt Porcelain Tiles | Floor Gres | Florim Ceramiche S.p.A.
Geotech - Basalt Porcelain Tiles | Floor Gres | Florim Ceramiche S.p.A.
Geotech - Basalt Porcelain Tiles | Floor Gres | Florim Ceramiche S.p.A.

Modulo Listello Sfalsato

GEOTECH WHITE MOD.LIS.SFALSATO NAT.21X40

Geowhite naturale

modulo listello sfalsato 21x40 cm

GEOTECH GREY MOD.LIS.SFALSATO NAT.21X40

Geogrey naturale

modulo listello sfalsato 21x40 cm

GEOTECH WHITE MOD.LIS.SFALSATO STR.21X40

Geowhite strutturata

modulo listello sfalsato 21x40 cm

GEOTECH GREY MOD.LIS.SFALSATO STR.21X40

Geogrey strutturata

modulo listello sfalsato 21x40 cm

Mosaico

GEOTECH WHITE NAT. 5X5 MOSAICO 30X30

Geowhite naturale

mosaico 5x5 30x30 cm

GEOTECH GREY NAT. 5X5 MOSAICO 30X30

Geogrey naturale

mosaico 5x5 30x30 cm

GEOTECH WHITE STR. 5X5 MOSAICO 30X30

Geowhite strutturata

mosaico 5x5 30x30 cm

GEOTECH GREY STR. 5X5 MOSAICO 30X30

Geogrey strutturata

mosaico 5x5 30x30 cm

GEOTECH WHITE CANNETE' 5X5 MOSAICO 30X30

Geowhite cannete

mosaico 5x5 30x30 cm

GEOTECH GREY CANNETE' 5X5 MOSAICO 30X30

Geogrey cannete

mosaico 5x5 30x30 cm

Reference standard E.N. 14411 . Appendix G. Group BⅠa. UGL
Test method
Reference value
Declared value
Download
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Slip resistance with shoes
DIN-51130:2010
-
R10
strutturata
Slip resistance with shoes
DIN-51130:2010
-
R11
cannetE
Barefoot slip resistance
DIN-51097
-
Cl. A+B
strutturata
Barefoot slip resistance
DIN-51097
-
Cl. A+B+C
cannetE
Static coefficient of friction
ASTM-C1028
>0,60 dry and wet
> 0,6
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
>0,42 wet

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

Subscribe to the Florim newsletter

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

Italiano Chiudi / Close