Timeless

Immortal beauty

Information request Download the catalog
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
The synthesis between purity, modernity and elegance

The synthesis between purity, modernity and elegance

These are the key words that represent the aesthetic research of Timeless of Cerim.

Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.

Inspired by attractive marble surfaces, the porcelain stoneware collection brings back a style of immortal beauty that is expressed through eight texture interpretations matched with various thickness options and sizes, even large 80 x 80 and 80 x 240 sizes with 6 mm reduced thickness.

Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.
Timeless - Marble Effect Tiles | Cerim | Florim Ceramiche S.p.A.

Colors

Calacatta

Ceppo di Grè

Amani Grey

Travertino

Marfil

Black Deep

Sizes

80x80 cm 32"x32"

80x240 cm 32"x95"

60x60 cm 24"x24"

60x120 cm 24"x48"

40x80 cm 16"x32"

30x60 cm 12"x24"

30x120 cm 12"x48"

modulo listello sfalsato 21x40 cm Modulo Listello Sfalsato 81/4"x16"

mosaico 3x3 30x30 cm Mosaico 11/8"x11/8" 12"x12"

mosaico 3d 5x30 30x30 cm Mosaico 3d 2"x12" 12"x12"

Thickness

10,00 mm

6,00 mm

Surfaces*

MATTE

GRIP

SHINY

* To find out more about the meaning of each surface, read the glossary at the following link www.florim.com/en/surfaces/

Due to the different production technologies, contiguous installation of products with different thickness may give a non-homogeneous result. For this reason we do not recommend this option. 

Colors:

Size:

Thickness:

Surface:

Reset filters Go to the product
Download the product and special trim catalog

Modulo Listello Sfalsato

TIMELESS CALAC MOD.LIST.SFAL. 21X40 NAT

Calacatta naturale

modulo listello sfalsato 21x40 cm

TIMELESS AM GR MOD.LIST.SFAL. 21X40 NAT

Amani Grey naturale

modulo listello sfalsato 21x40 cm

TIMELESS CE GR MOD.LIST.SFAL. 21X40 NAT

Ceppo di Grè naturale

modulo listello sfalsato 21x40 cm

TIMELESS BL DE MOD.LIST.SFAL. 21X40 NAT

Black Deep naturale

modulo listello sfalsato 21x40 cm

TIMELESS TRAVER MOD.LIST.SFAL. 21X40 NAT

Travertino naturale

modulo listello sfalsato 21x40 cm

TIMELESS MARFIL MOD.LIST.SFAL.21X40 NAT

Marfil naturale

modulo listello sfalsato 21x40 cm

Mosaico

TIMELESS CALACATTA 3x3 MOSAICO 30X30 NAT

Calacatta naturale

mosaico 3x3 30x30 cm

TIMELESS AMANI GRE 3x3 MOSAICO 30X30 NAT

Amani Grey naturale

mosaico 3x3 30x30 cm

TIMELESS CEPPO DI GRE' 3x3 MOS 30X30 NAT

Ceppo di Grè naturale

mosaico 3x3 30x30 cm

TIMELESS BLACK DEE 3x3 MOSAICO 30X30 NAT

Black Deep naturale

mosaico 3x3 30x30 cm

TIMELESS TRAVERTINO 3x3 MOSAICO 30X30NAT

Travertino naturale

mosaico 3x3 30x30 cm

TIMELESS MARFIL 3x3 MOSAICO 30X30 NAT

Marfil naturale

mosaico 3x3 30x30 cm

Mosaico 3d

TIMELESS CALACATTA MOS 3D NAT 30X30

Calacatta naturale

mosaico 3d 5x30 30x30 cm

TIMELESS AMANI GREY MOS 3D NAT 30X30

Amani Grey naturale

mosaico 3d 5x30 30x30 cm

TIMELESS CEPPO DI GRE' MOS 3D NAT 30X30

Ceppo di Grè naturale

mosaico 3d 5x30 30x30 cm

TIMELESS BLACK DEEP MOS 3D NAT 30X30

Black Deep naturale

mosaico 3d 5x30 30x30 cm

TIMELESS TRAVERTINO MOS 3D NAT 30X30

Travertino naturale

mosaico 3d 5x30 30x30 cm

TIMELESS MARFIL MOS 3D NAT 30X30

Marfil naturale

mosaico 3d 5x30 30x30 cm

Notes

Florim recommends laying with epoxy grout for wet environments or those subject to strong humidity.

Reference standard E.N. 14411 . Appendix G. Group BⅠa. GL
Test method
Reference value
Declared value
Download
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
±5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
±0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
±0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
Cl. 3 (Amani Grey, Black deep); cl. 4 (Travertino, Marfil, Ceppo di grè)
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
cl.5 (Calacatta)
Glaze crazing resistence
ISO-10545-11
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
Cl. 3
SHINY
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
Cl. 4
MATTE
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
Cl. 4
GRIP
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
GB minimo / GB minimum / GB minimum / GB mindestens / GB minimo
GA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLA
MATTE
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLB
SHINY
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLA
GRIP
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
MATTE
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
GRIP
Slip resistance with shoes
DIN-51130:2010
-
R11
GRIP
Slip resistance with shoes
DIN-51130:2010
-
R9
MATTE
Barefoot slip resistance
DIN-51097
-
Cl. A+B
GRIP

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
±5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
±0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
±0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
±0,2%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness < 7,5 mm)
ISO-10545-4
≥700 Newton
average value 1350 N *
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2 *
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
Cl. 3 (Amani Grey, Black deep); cl. 4 (Travertino, Marfil, Ceppo di grè)
Resistance to abrasion of glazed tiles
ISO-10545-7
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
cl.5 (Calacatta)
Glaze crazing resistence
ISO-10545-11
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
Cl. 3
SHINY
Resistance to staining
ISO-10545-14
classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo
Cl. 4
MATTE
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
GB minimo / GB minimum / GB minimum / GB mindestens / GB minimo
GA
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLA
MATTE
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
GLB
SHINY
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
MATTE
Slip resistance with shoes
DIN-51130:2010
-
R9
MATTE
Release of hazardous substances
DM-1-2-2007-Reg-CE-1935-2004
Valore dichiarato per superfici gl con impieghi su piani di lavoro / Declared value for gl surfaces used on worktops / valeur déclarée Pour surfaces gl utilisées sur plans de travail /angegebener wert für Gl oberflächen zum gebrauch als arbeitsplatten / valor declarado Para acabados gl utilizados para superficies de trabajo / заявленное Значение для глазурованных поверхностей, с использованием на рабочих столах
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

* Test performed on 80x80cm size

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Contact us

Similar products

Antique Marble

Antique Marble

Cerim
Natural Stone

Natural Stone

Cerim
Contemporary Stone

Contemporary Stone

Cerim

Search for products in the other Florim brands

Discover

If you want, we'll keep you updated on the latest news about products and events

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

Italiano Chiudi / Close