Warmth, simplicity, elegance and softness

Details wood of Cerim enhances environments with its attractive colors and a rich aesthetic expression that rekindles the emotion of natural environments.

Details Wood - Wooden Look Tiles | Cerim | Florim Ceramiche S.p.A.

Download the product and special trim catalog

Modulo Listello Sfalsato

DETAILS WOOD WHITE MOD.LIST.SFAL. 15X40 — White naturale

modulo listello sfalsato 15x40 cm

DETAILS WOOD GRAY MOD.LIST.SFAL. 15X40 — Gray naturale

modulo listello sfalsato 15x40 cm

DETAILS WOOD BEIGE MOD.LIST.SFAL. 15X40 — Beige naturale

modulo listello sfalsato 15x40 cm

DETAILS WOOD BROWN MOD.LIST.SFAL. 15X40 — Brown naturale

modulo listello sfalsato 15x40 cm

DETAILS WOOD TAUPE MOD.LIST.SFAL. 15X40 — Taupe naturale

modulo listello sfalsato 15x40 cm

Projects with the collection

Villa AA | Matteo Guerini

Bagnolo Cremasco - IT

Residential

Loft is loft | Martin Architects

Kiev - UA

Residential

Reference standard E.N. 14411 . Appendix G. Group BⅠa. GL

Test method

Reference value

Declared value

Download

  
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
 
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5% 
 
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
 
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
 
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
 
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
 

Amount of water absorbed, in percentage

ISO-10545-3

E<0,5%

average value 0,08%

Breaking strength in N (thickness >= 7,5 mm)

ISO-10545-4

≥1300 Newton

average value 3200 N

Bending strength in N/mm2

ISO-10545-4

>35 N/mm2

average value 50 N/mm2

Resistance to abrasion of glazed tiles

ISO-10545-7

Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante

cl.3 (Beige, Brown) / cl. 4 (Grey, White, Taupe)

Thermal shock resistance

ISO-10545-9

-

RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ

Glaze crazing resistence

ISO-10545-11

Richiesta / Required / Requise / Gefordert / Requerida

RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ

Resistance to staining

ISO-10545-14

classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo

4

Resistance to low concentrations of acids and alkali

ISO-10545-13

Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante

GLA-GLB

Resistance to domestic chemicals and additives for swimming pools

ISO-10545-13

GB minimo / GB minimum / GB minimum / GB mindestens / GB minimo

GA

Frost resistance

ISO-10545-12

Richiesta / Required / Requise / Gefordert / Requerida

RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ

Slip resistance with shoes

DIN-51130:2010

-

R9

Slip resistance with shoes

DIN-51130:2010

-

R11
GRIP

Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)

DCOF

>0,42 wet

> 0,42 wet

Barefoot slip resistance

DIN-51097

-

Cl. A+B
GRIP

  
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
 
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
 
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,10%
 
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,20%
 
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
 
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
 

Amount of water absorbed, in percentage

ISO-10545-3

E<0,5%

average value 0,08%

Breaking strength in N (thickness >= 7,5 mm)

ISO-10545-4

≥1300 Newton

average value 14000

Bending strength in N/mm2

ISO-10545-4

>35 N/mm2

average value 52

Thermal shock resistance

ISO-10545-9

-

RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ

Resistance to staining

ISO-10545-14

-

4

Resistance to low concentrations of acids and alkali

ISO-10545-13

Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante

ULA

Resistance to high concentrations of acids and alkali

ISO-10545-13

Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante

UHA

Resistance to domestic chemicals and additives for swimming pools

ISO-10545-13

UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo

UA

Frost resistance

ISO-10545-12

Richiesta / Required / Requise / Gefordert / Requerida

RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ

Slip resistance with shoes

DIN-51130:2010

-

R11

Resistance to deep abrasion of unglazed tiles

ISO-10545-6

<175 mm3

average value 140

Barefoot slip resistance

DIN-51097

-

cl. A+B

  
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
 
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5% 
 
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
 
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
 
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
 
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
 

Amount of water absorbed, in percentage

ISO-10545-3

E<0,5%

average value 0,08%

Breaking strength in N (thickness >= 7,5 mm)

ISO-10545-4

≥1300 Newton

average value 3200 N

Bending strength in N/mm2

ISO-10545-4

>35 N/mm2

average value 50 N/mm2

Resistance to abrasion of glazed tiles

ISO-10545-7

Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante

cl.3 (Beige, Brown) / cl. 4 (Grey, White, Taupe)

Thermal shock resistance

ISO-10545-9

-

RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ

Glaze crazing resistence

ISO-10545-11

Richiesta / Required / Requise / Gefordert / Requerida

RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ

Resistance to staining

ISO-10545-14

classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo

4

Resistance to low concentrations of acids and alkali

ISO-10545-13

Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante

GLA-GLB

Resistance to domestic chemicals and additives for swimming pools

ISO-10545-13

GB minimo / GB minimum / GB minimum / GB mindestens / GB minimo

GA

Frost resistance

ISO-10545-12

Richiesta / Required / Requise / Gefordert / Requerida

RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ

Slip resistance with shoes

DIN-51130:2010

-

R9

Slip resistance with shoes

DIN-51130:2010

-

R11
GRIP

Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)

DCOF

>0,42 wet

> 0,42 wet

Barefoot slip resistance

DIN-51097

-

Cl. A+B
GRIP

  
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
± 0,15%
 
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
 
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,10%
 
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,20%
 
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
 
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
 

Amount of water absorbed, in percentage

ISO-10545-3

E<0,5%

average value 0,08%

Breaking strength in N (thickness >= 7,5 mm)

ISO-10545-4

≥1300 Newton

average value 14000

Bending strength in N/mm2

ISO-10545-4

>35 N/mm2

average value 52

Thermal shock resistance

ISO-10545-9

-

RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ

Resistance to staining

ISO-10545-14

-

4

Resistance to low concentrations of acids and alkali

ISO-10545-13

Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante

ULA

Resistance to high concentrations of acids and alkali

ISO-10545-13

Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante

UHA

Resistance to domestic chemicals and additives for swimming pools

ISO-10545-13

UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo

UA

Frost resistance

ISO-10545-12

Richiesta / Required / Requise / Gefordert / Requerida

RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ

Slip resistance with shoes

DIN-51130:2010

-

R11

Resistance to deep abrasion of unglazed tiles

ISO-10545-6

<175 mm3

average value 140

Barefoot slip resistance

DIN-51097

-

cl. A+B

Notes

Ceramic tiles undergo a compacting thermal treatment that ensures resistance and durability. The low level of water absorption makes the slabs frost resistant. This could result in superficial water stagnations even if materials are installed in a workmanlike manner.