Texture

Delicate patterns unleash compositional energy

Texture - Fabric Look Tiles | Casa dolce casa - Casamood | Florim
Out of the creative union of stone and fabric, Texture is born

Out of the creative union of stone and fabric, Texture is born

The study and the search for patterns and graphic signs thoroughly investigate all the chromatic, aesthetic and compositional possibilities of the materials, becoming an expression of personal desires. Texture is the new Casa dolce casa - Casamood collection that stems from the creative union of two material inspirations: the aesthetics of an elegant stone and the pattern of a precious fabric.

Texture - Fabric Look Tiles | Casa dolce casa - Casamood | Florim
Texture - Fabric Look Tiles | Casa dolce casa - Casamood | Florim
Texture - Fabric Look Tiles | Casa dolce casa - Casamood | Florim

Compositional games therefore come out on the surface, unleashing the unexpected aesthetic power, a natural inclination to the geometry and beauty that is born out of the mixture of the colors in the range to bring to mind the charm of refined atmospheres from a not so distant past.

Texture - Fabric Look Tiles | Casa dolce casa - Casamood | Florim
Texture - Fabric Look Tiles | Casa dolce casa - Casamood | Florim
Texture - Fabric Look Tiles | Casa dolce casa - Casamood | Florim

TECHNICAL NOTES

Texture is available in different colors and different sizes that are modular with one another to allow personal combinations, suitable for both flooring and wall coverings. The range is further enriched by a fifth, large format decoration that embodies the aesthetic and material expression of the collection.

Decor Vintage

TEXTURE DECOR VINTAGE 240x240

DECOR VINTAGE

240x240 cm

Reference standard E.N. 14411 . Appendix G. Group BⅠa. UGL
Test method
Reference value
Declared value
Download
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
±0,6% (±2 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±1,5 mm)
± 0,1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
±0,5% (±2 mm)
± 0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
±0,5% (±2mm)
± 0,35%
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage
ISO-10545-3
E<0,5%
average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)
ISO-10545-4
≥1300 Newton
average value 3200 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 50 N/mm2
Resistance to deep abrasion of unglazed tiles
ISO-10545-6
<175 mm3
average value 140 mm3
Resistance to staining
ISO-10545-14
-
Cl. 3
Thermal shock resistance
ISO-10545-9
-
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Frost resistance
ISO-10545-12
Richiesta / Required / Requise / Gefordert / Requerida
RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
> 0,42 wet
Slip resistance with shoes
DIN-51130:2010
-
R9

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Similar products

Subscribe to the Florim newsletter

Cambia Lingua RU

Se preferisci puoi impostare la lingua del sito per navigarlo in russo

Vai al russo Chiudi / Close

Cambiar idioma

Si prefieres, puedes configurar el idioma del sitio para navegar en español

Ir a la versión en español Chiudi / Close

Sprachwechsel

Sie können die folgenden Sprachen auswählen deutsch

Wechsel zu deutsch Chiudi / Close

Changer langue

Si vous préférez, vous pouvez configurer la langue du site pour naviguer en français

Aller sur la version française Chiudi / Close

Switch language

If you prefer, you can set the website language to browse it in English

Go to the English version Chiudi / Close

Scegli la lingua

Se preferisci puoi impostare la lingua del sito per navigarlo in italiano. Invece, per continuare sul sito inglese clicca sul pulsante chiudi.

Italiano Chiudi / Close