Icon Outdoor is the self-supporting solution in fine porcelain stoneware to create continuity between interior and exterior environments

At the service of private and public applications, this collection in oversized 2 cm thickness allows aesthetics, performance, versatility, easy installation and environmental friendliness to be combined.

A new way to floor exterior spaces with style, both in private settings and in high foot traffic situations.

TECHNICAL NOTES

Made up of recycled material at a percentage of more than 70%, Icon Outdoor is Bureau Veritas certified in accordance with international standard ISO 14021. Icon Outdoor is ideal for terraces, gazebos, gardens, patios, pools and relaxation areas, as well as for applications without joints on grass, gravel, concrete floor slab and also on fixed or adjustable feet.

Colors

White

Light Grey

Sizes

60x60 cm 24"x24"

40x120 cm 16"x48"

Thickness

20,00 mm

Surfaces*

MATTE

* To find out more about the meaning of each surface, read the glossary at the following link www.florim.com/en/surfaces/

Colors:

Size:

Thickness:

Surface:

Reset filters Go to the product

Download the product and special trim catalog

Projects with the collection

Private house Lecco

Lecco - IT

Residential

Brunello Cucinelli

New York - US

Retail

Reference standard E.N. 14411-ISO 13006 . Appendix G. Group BⅠa. UGL

Test method

Reference value

Declared value

Download

Thermal shock resistance

ISO-10545-9

-

RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ

Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±1 mm)
 ± 0,15%

Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
 ± 5%

Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±0,8 mm)
 ± 0,1%

Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±1,5 mm)
 ± 0,2%

Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
Squadrato ISO 13006 - ±0,4% (±1,8 mm)
 ± 0,35%

Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ

Amount of water absorbed, in percentage

ISO-10545-3

E≤0,5%

average value 0,08%

Breaking strength in N (thickness >= 7,5 mm)

ISO-10545-4

≥1300 Newton

average value 14000 N

Bending strength in N/mm2

ISO-10545-4

>35 N/mm2

average value 52 N/mm2

Resistance to deep abrasion of unglazed tiles

ISO-10545-6

<175 mm3

average value 140

Resistance to low concentrations of acids and alkali

ISO-10545-13

Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante

ULA

Resistance to high concentrations of acids and alkali

ISO-10545-13

Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante

UHA

Resistance to domestic chemicals and additives for swimming pools

ISO-10545-13

UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo

UA

Resistance to staining

ISO-10545-14

-

4

Barefoot slip resistance

DIN-51097

-

Cl. C

Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)

DCOF

>0,42 wet

> 0,42 wet

Frost resistance

ISO-10545-12

Richiesta / Required / Requise / Gefordert / Requerida

RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ

Slip resistance with shoes

DIN-51130

-

R11

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

Ceramic tiles undergo a compacting thermal treatment that ensures resistance and durability. The low level of water absorption makes the slabs frost resistant. This could result in superficial water stagnations even if materials are installed in a workmanlike manner.