The vibrant energy of the first Flagstone project goes back to a revamped look charged with vitality

Far from the whimsical influences of fashion, Flagstone 2.0 remains faithful to itself and recalls its past history through the richness of the color and structural details where each color expresses its specific surface finish.

Flagstone 2.0 | Casa dolce casa - Casamood | Florim Ceramiche S.p.A.

TECHNICAL NOTES

Flagstone 2.0 has clear graphic variations, sought in order to obtain the natural effect of the stone from which it draws inspiration. The different available colors are matched to specific surface finishes that enhance the details and define the recommended uses.

Download the product and special trim catalog

Modulo Muretto

FLAGSTONE WHITE GLOSSY MUR.DRITTO 7,5X15 — White glossy

modulo muretto 7,5x15 30x30 cm

FLAGSTONE BLACK GLOSSY MUR.DRITTO 7,5X15 — Black glossy

modulo muretto 7,5x15 30x30 cm

FLAGSTONE GREEN GLOSSY MUR.DRITTO 7,5X15 — Green glossy

modulo muretto 7,5x15 30x30 cm

FLAGSTONE WHITE NAT.MUR.DRITTO 7,5X15 — White matte

modulo muretto 7,5x15 30x30 cm

FLAGSTONE GREY NAT.MUR.DRITTO 7,5X15 — Grey matte

modulo muretto 7,5x15 30x30 cm

FLAGSTONE PLOMB NAT.MUR.DRITTO 7,5X15 — Plomb matte

modulo muretto 7,5x15 30x30 cm

FLAGSTONE GREEN NAT.MUR.DRITTO 7,5X15 — Green matte

modulo muretto 7,5x15 30x30 cm

FLAGSTONE BLACK NAT.MUR.DRITTO 7,5X15 — Black matte

modulo muretto 7,5x15 30x30 cm

FLAGSTONE GREY GLOSSY MUR.DRITTO 7,5X15 — Grey glossy

modulo muretto 7,5x15 30x30 cm

FLAGSTONE PLOMB GLOSSY MUR.DRITTO 7,5X15 — Plomb glossy

modulo muretto 7,5x15 30x30 cm

Modulo Muretto Sfalsato

FLAGSTONE WHITE GLOSSY MUR. SFAL. 7,5X15 — White glossy

modulo muretto sfalsato 7,5x15 30x30 cm

FLAGSTONE BLACK GLOSSY MUR. SFAL. 7,5X15 — Black glossy

modulo muretto sfalsato 7,5x15 30x30 cm

FLAGSTONE GREEN GLOSSY MUR. SFAL. 7,5X15 — Green glossy

modulo muretto sfalsato 7,5x15 30x30 cm

FLAGSTONE WHITE NAT. MUR. SFAL. 7,5X15 — White matte

modulo muretto sfalsato 7,5x15 30x30 cm

FLAGSTONE GREY NAT. MUR. SFAL. 7,5X15 — Grey matte

modulo muretto sfalsato 7,5x15 30x30 cm

FLAGSTONE PLOMB NAT. MUR. SFAL. 7,5X15 — Plomb matte

modulo muretto sfalsato 7,5x15 30x30 cm

FLAGSTONE GREEN NAT. MUR. SFAL. 7,5X15 — Green matte

modulo muretto sfalsato 7,5x15 30x30 cm

FLAGSTONE BLACK NAT. MUR. SFAL. 7,5X15 — Black matte

modulo muretto sfalsato 7,5x15 30x30 cm

FLAGSTONE GREY GLOSSY MUR. SFAL. 7,5X15 — Grey glossy

modulo muretto sfalsato 7,5x15 30x30 cm

FLAGSTONE PLOMB GLOSSY MUR. SFAL. 7,5X15 — Plomb glossy

modulo muretto sfalsato 7,5x15 30x30 cm

Mosaico

FLAGSTONE 2.0 GREEN GLOSSY MOSAICO 5X5 — Green glossy

mosaico 5x5 30x30 cm

FLAGSTONE 2.0 WHITE NATURALE MOSAICO 5X5 — White matte

mosaico 5x5 30x30 cm

FLAGSTONE 2.0 GREY NATURALE MOSAICO 5X5 — Grey matte

mosaico 5x5 30x30 cm

FLAGSTONE 2.0 PLOMB NATURALE MOSAICO 5X5 — Plomb matte

mosaico 5x5 30x30 cm

FLAGSTONE 2.0 GREEN NATURALE MOSAICO 5X5 — Green matte

mosaico 5x5 30x30 cm

FLAGSTONE 2.0 BLACK NATURALE MOSAICO 5X5 — Black matte

mosaico 5x5 30x30 cm

FLAGSTONE 2.0 GREY GLOSSY MOSAICO 5X5 — Grey glossy

mosaico 5x5 30x30 cm

FLAGSTONE 2.0 PLOMB GLOSSY MOSAICO 5X5 — Plomb glossy

mosaico 5x5 30x30 cm

Catalogue Flagstone 2.0

Reference standard E.N. 14411-ISO 13006 . Appendix G. Group BⅠa. UGL

Test method

Reference value

Declared value

Download

  
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±1 mm)
±0,15%
 
Admitted deviation, in %, of the average thickness of each tile from the production dimensions
ISO-10545-2
±5% (±0,5 mm)
±5%
 
Maximum straightness deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±0,8 mm)
±0,1%
 
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±1,5 mm)
±0,2%
 
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
Squadrato ISO 13006 - ±0,4% (±1,8 mm)
±0,35%
 
Surface quality
ISO-10545-2
Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles
CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
 

Amount of water absorbed, in percentage

ISO-10545-3

E≤0,5%

average value 0,08%

Breaking strength in N (thickness >= 7,5 mm)

ISO-10545-4

≥1300 Newton

average value 3200

Bending strength in N/mm2

ISO-10545-4

>35 N/mm2

average value 50 N/mm2

Resistance to deep abrasion of unglazed tiles

ISO-10545-6

<175 mm3

average value 140 mm3

Thermal shock resistance

ISO-10545-9

-

RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ

Frost resistance

ISO-10545-12

Richiesta / Required / Requise / Gefordert / Requerida

RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ

  
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHA
 MATTE
 
Resistance to high concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
UHB
 GLOSSY
 
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULA
 MATTE
 
Resistance to low concentrations of acids and alkali
ISO-10545-13
Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante
ULB
 GLOSSY
 
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo
UA
 

Resistance to staining

ISO-10545-14

-

Cl. 4

Slip resistance with shoes

DIN-51130:2010

-

R10
MATTE

Slip resistance with shoes

DIN-51130:2010

-

R11
SLATE-HAMMERED

Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)

DCOF

>0,42 wet

wet > 0,42
MATTE

Barefoot slip resistance

DIN-51097

-

Cl. A
MATTE

Barefoot slip resistance

DIN-51097

-

Cl. A+B
SLATE-HAMMERED

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

System certifications

Contact us for more information

Contact us for more information about products, dealers or to receive technical support.

Contact us

Similar products

Search for products in the other Florim brands

Discover

The vibrant energy of the first Flagstone project goes back to a revamped look charged with vitality

TECHNICAL NOTES

Modulo Muretto

White glossy

Black glossy

Green glossy

White matte

Grey matte

Plomb matte

Green matte

Black matte

Grey glossy

Plomb glossy

Modulo Muretto Sfalsato

White glossy

Black glossy

Green glossy

White matte

Grey matte

Plomb matte

Green matte

Black matte

Grey glossy

Plomb glossy

Mosaico

White glossy

Black glossy

Green glossy

White matte

Grey matte

Plomb matte

Green matte

Black matte

Grey glossy

Plomb glossy

Notes

System certifications

Contact us for more information

Similar products

Onyx&More

Artwork

Sensi

Search for products in the other Florim brands

If you want, we'll keep you updated on the latest news about products and events

Cambia Lingua RU

Cambiar idioma

Sprachwechsel

Changer langue

Switch language

Scegli la lingua